Search results for query: *

Fixing several monitors for a fellow enthusiast in KC. When testing this, it powered up but I had an all red screen with retrace lines. I suspected a shorted ren gun in the tube but I soon discovered the neck board was cracked. Exposed the traces, flowed some solder bridges to restore the...

@LittleLarrySellr sent me a K8000 to check out for him because he wants to use it in his Super Sprint. He could not get it to sync with his setup. He thought it might have had a fault, so he asked if I could take a look. I had never seen, worked on, or even heard of a K8000, so I said "sure."...

The G07 in the Rally X at The Arcade was getting dimmer and dimmer by the day. Took it out today and brought it home to the test bench. It had been capped (way back in 1992) and it looked to be in decent shape, other than being filthy. Cleaned it up, capped it, reflowed it, and hooked it up to...

25" K7000. Severe vertical oscillation (only at the bottom of the screen) and the image starts folding over, losing sync, and going crazy after a minute or so (the IC3 heat sink gets scalding hot at this point). The story with this is the chassis had vertical deflection issues and the original...

This chassis was donated to me in a "won't come up" condition. A few caps had been replaced in an attempt to fix it but it appears that at some point, the chassis had been severely mishandled. First thing I did was attempt to duplicate the issue. It did power up and I had high voltage, but the...

U2000 on the bench. No signs of life. No ticking, no sounds, nothing. Report was it was working and then died with a burning smell. Quick testing revealed the power supply was working but the horizontal section was not energizing. Nothing visually looked bad. No burned spots, burned components...

Made a video on how to fix a shorted color gun if you have one, assuming zapping the tube doesn't fix it...

G07 was sent in for repair. Opened the box to find this. A little super glue, a little fiberglass pen work, and a few solder bridges later...it's all fixed. F901 was blown due to a bad flyback. Replaced the flyback, replaced F901, all new caps, full reflow, full inspection to verify nothing else...

Just picked up this MK4 today. 32,000 credits played. All original. Works as it should except the monitor was all Red. Got it home, removed the monitor, and threw it on the bench for testing. Hooked up the B&K. Got everything setup and ran through the Emissions test. Sure enough, the Green and...

Got a G07 that needed a new flyback. While making a video on the repair, figured I'd show how to properly replace the flyback. A lot of people just install the replacements as they are, but the G2 wire needs trimmed and routed correctly. The procedure starts at the 19:47 mark...

25" K7000 on the bench. Was a "parts" chassis that I revived. After getting it all fixed up, it's working and looking great but when testing the V.Size adjustment, I noticed that if I went all the way down with it, I get these black blobs. Suspected the flyback so I replaced it. Nope. The whole...

Downsizing my collection. Putting these three up for sale. Shoot me a message for details and more pics if you're interested. Located in Wichita, KS. Thanks. Elvira BRKE (with topper, 180 plays) - $12,500. CSI - $5000 DE Star Trek - $4500

Got a couple 7000s in for repair. One with full vertical collapse. Another with partial collapse. Started with the one in full collapse. Gave it a full look over and the first thing I noticed was a missing fuse. Checked all the normal power components and they were good. I also found numerous...

Hey everyone. Got a 600DX in for repair. Came from a Big Buck Hunter that was picked up from an auction. The chassis is missing 4 components. I cannot find a schematic and I have never worked on or even seen one of these before. Anyone have any idea what the part numbers are for D408, D409...

I've said it before, I'll say it again, and I'll say it forever. If you have a 90's Midway sound board and you haven't capped it, go cap it right now.

Got this in for repair along with a U2000 chassis. Set the U2000 aside and started with this. Gave it an inspection and noticed it had no battery installed. SOME of these Wolf Unit boards require a battery to be installed/battery holder contacts to be touching in order to boot, but others do...

Went down to Tulsa yesterday and snagged this. Starry apron and Buthamburg playfield. This game is from the last shipment of TBLs and has the Buthamburg playfield instead of the Mirco. 1491 TBLs had a Mirco playfield and around 33 games have a Buthamburg. Been waiting for one of these to pop...

Need a spare controller if anyone has one. We had one meet an aggressive end at the hands of a child who was using the machine like a jungle gym.

Someone please come to Wichita and take all this stuff off my hands. 50 complete monitors and 50 (give or take) loose chassis.' Everything you see is completely fixed/rebuilt/tested/working, etc at the time they were shelved (except for the chassis' in the boxes - still gotta fix those)...

Picked up a couple non-working U2000s from a fellow enthusiast a few days back. Got the first one tackled today. It already had a cap kit and a new flyback installed but there were a lot of destroyed pads and traces that I had to fix along with some smashed components. Got all that fixed up but...