Search results for query: *

Galaga board set for sale. I have gone through this and all the typical weak/trouble spots on these boards have been addressed: all CPU, custom, and EPROM sockets on both boards have been replaced with double wipe sockets, and all custom legs have been cleaned. A few custom legs have been...

Howdy y'all, wanted to run something by some 6100 experts before I took my next step. I recently recapped a new-to-me 6100. It looked as if it had never been serviced so I didn't even bother powering it up, I just decided to recap it before doing anything else. Did all caps on the deflection...

Was cleaning out a closet and found this Centipede "nude" poster. I am 100% certain this is a repro, but I can't remember who did them or where I got it. Approx 24"x36". It's never been used, my guess is that taking this photo this morning was maybe the 2nd time it's ever been out of the tube...

Dig Dug to jamma adapter for sale. Works fine, just don't need it any more. Allows Atari Dig Dug board to be played in a jamma cabinet. Has a little sound amp and volume control built in. $45 shipped within the US.

I am about to begin restoring an Omega Race upright. I have pretty much everything I need except the cardboard interior artwork/scenery pieces. Hoping somebody can help me out with these pieces, nobody seems to repro them. EDIT found the side pieces, still looking for the larger rear backdrop...

I have a really nice Galaga for sale. This is actually a Ms Pac cab converted to Galaga, so if you are a stickler for originality this might not be for you. Because the two cabinets were not 100% identical, there are a few little fit and finish issues involved with the conversion (the coin door...

Looking for coin bucket and coin bucket holder for a Ms Pac/Galaga cabinet. Thanks!

I just picked up my first jukebox, an NSM Prestige 2. Powered it up for the first time yesterday and the playback is s------l------o------w. I removed the carriage and started poking around, and it has all the signs of somebody who lubed it with WD-40 and now it's all dried up and gummy...

Clean and working Super Cobra pcb for sale, This has been fully tested on my bench and works 100%. This is the Stern/URL version of this board, and uses the standard Konami pinout. I have replaced the header pins that connect to the amplifier board, as they seem to often get bent out of shape...

Hey I just scored my first jukebox, an NSM Prestige II. I've never heard of the brand, but then again if it's not Wurlitzer Seeburg or Rock Ola I've probably never heard of it anyway! I guess they're German made? Previous owner said it plays but at the wrong speed. Sounded to me like something...

I am working on a WG k7203 chassis and could use some help. It's not a monitor I have a lot of familiarity with so I've been learning as I go. When it came to me, the MPP cap at C601 (.68 uF) had exploded, so I replaced it without even bothering to power it up first. The chassis then powered up...

I have a WG k7203 that I'm trying to repair and could use some quick help IDing a capacitor that has melted. The cap in question is C517, and it's one of those poly caps which I am not very familiar with. How do I read this schematic and what part do I need to get to replace this? It's a 1600v...

I'm hoping somebody here can help fix a game in north-central Montana, or can recommend a good reputable arcade tech in that area. The story: I have a Crystal Castles upright that I loaned to my sister and bro-in-law. I had no room for it in my arcade, so I asked them if they would like to keep...

I am working on a Crystal Castles board that works fine except with some video errors. Although not visible in this picture, text and motion objects all look fine, the top scores and hint screens are both all correct, and the game coins up and plays. The issue is only present with the castle...

I'm restoring a Street Fighter II Champion Edition cabinet for a friend of mine and have come up against an odd issue. This cabinet came with what I was told was the original monitor, which appears to be a Neotec s501. It's not a monitor I am familiar with and there doesn't seem to be a lot of...

Looking for a Gravitar pcb to complete a project cab. Untested/non-working OK and actually preferred, because A) I'm cheap, and B) I get more enjoyment out of fixing than acquiring. Let me know what you have, thanks!

I have a Stern Super Cobra pcb for sale. Tested working, all inputs and sound work great and the game kicks my ass like it always has. The header pins that connect to the amp board have been replaced, as they are often a weak spot on these boards. This is the Stern/URL labeled version of this...

I somehow ended up with a manual for an oscilloscope I do not own. It's for an HP 1727A. It's in good condition, has a number of fold-out schematics and drawings etc. Was this close to throwing it away when I decided to see if anybody here could use it. Free to whoever wants to pay the shipping...

I am looking for an audio amp board and audio transformer for a Sanyo EZ20 monitor/Nintendo cab. Untested/not working is fine. I have a Nintendo cab that came with an original Sanyo monitor, but it had been converted to jamma and the audio stuff was removed. I'm restoring it back to its original...

I have a 1950 Chicago Coin Fighting Irish pinball machine I'm hoping somebody can help me with. At the bottom of the cabinet, on the transformer block area, there is a group of components and on mine, one of the components is clearly missing. The label that would tell me what was there is also...