Search results for query: *

Looking for some advice about Out Run. a) What kind of grease should I use on the pedal pots, steering pots, and sliding shaker platform? b) What causes the shifter to get sloppy and lose it's positive detent? How is this fixed? Also, how do I get the ting out of the control panel? The...

Looking for project cabs to turn into a kegerator for work. Need something fairly wide to get the refrigeration equipment in there. Just wondering if there's something that would be a good starting point, or if we should build the cab from scratch. Plan is to put an LCD screen in it with a...

I'm asking for my neighbor. Are there any good slot techs in So.Cal (Ventura County, San Fernando Valley, LA areas)? He's having problems with his slot machine. Could just be related to the bill acceptor. He said it reports something about a "com error". Thanks!

I just had a game room built with a wooden (well, laminate) floor. I don't want to just move the games and pins in and scratch the crap out of it. What do you guys recommend for protecting the floor against the feet of the games and pins?

I have a dirty Whirlwind pin, and the mylar is bubbled in places (also the inserts are crazed, but that might be the mylar too). Is it worth removing the mylar? Or is that just going to make things worse? Also, the machine is dirtiest where there is no mylar, but I've been unable to get those...

My Whirlwind was working, but I had issues with a bad driver row, and the backbox GI which caused me to pull the main CPU board and reflow some connectors. After replacing everything, I get the factory defaults message as expected, but the display is weak and flickering (some digits not...

I've replaced the crappy monitor in my original Universal Mr Do! with a TM202G that I've had hanging around. The problem I have is that the monitor is pulsating in brightness, the pulsation speeds up then starts over, also it loses focus a bit as it's getting brighter. Is this a known problem...

I have a Tales From The Crypt in great condition, and I'm looking to trade for a Hook in the same condition. I'm in Simi Valley, CA

I need to make some joystick adapter plates for my DKjr cocktail, so I've marked them out on some steel plate from an old monitor frame. The problem I'm having is with cutting them out. The stuff is so strong it seems to take forever to make any kind of impact with a hacksaw (and it's noisy as...

I got a new flyback, HOT and capkit from Bob Roberts, but my 13" G07 still won't fire up. I managed to get a meter on the B+, and it's way high at 165v (should be 120v). The manual says that I should adjust R909, but there isn't on on this chassis. Doesn't look like there ever was one...

G07 FBO 13" Troubleshooting I just picked up a dig dug cocktail that plays blind. It has a 13" GO7 FBO in it, that seems to have HV ( I can hear the line frequency oscillate and feel static on the screen ) but it has no neck glow. Before I go to the trouble of pulling the monitor, is there...

Very expensive back in the day, takes, RGB, S-Video and composite input. Rack mountable but very heavy. Make offer. Pick up in Simi Valley, Ventura County, CA

It's a WGT1730-S1DS11K in its original box. I think it's a WG U3000 chassis and takes VGA input. I was going to use it for a touch screen video jukebox project, but I never got around to it. Make an offer. Pick up in Simi Valley, Ventura County, CA.

I have a problem with my Rescue 911. The ball lift motor fails to operate most of the time, but occasionally it works fine. So far, I've checked the power to the motor (it's missing when it doesn't work). I've checked the drive for that motor (pin 16 of U3 on the driver board and that stays...

Just thought I'd ask again if anyone has one of these keys they could lend to me so I can get one cut. Or perhaps can get one cut for me and mail it. Thanks for the help!

http://losangeles.craigslist.org/ele/338880472.html

The marquee has an orangey yellow gel taped to the back, it is just taped at the top and hangs down against the glass, is this normal for a Gun Fight game? I seem to remember them being black & white rather than yellow/orange. What's a good cheap source for the 14v #1895 marquee bulbs? I'm...

Having trouble with mine. No picture, just a blank (but bright) raster. I've scoped out the video circuit and everything seems pretty good. The sync separator also seems to check out good. Looking at the phase detector, I see good signals on both inputs of D7, but nothing at all on the...

Just for the record, it's not Moonwalker, My Hero or Pong... My neighbor was describing this game to me... It's a putting game, but each level changes the surface that you putt over, moving parts up and down, and or tilting them. He'd really like to get one. Anyone know what this game is called?

1) Is there a decent modern replacement for the fan in this cabinet that will fit without modification? Mine has the original hair drier style one, and it's just as loud as a hair drier too. 2) Is there a schematic for the power supply? I see the 5v -5v and 12v adjust pots, but there's no...