Search results for query: *

In the pictures you will see a line in the left side of the screen. It does scroll upwards This affects gun accuracy it seems with dead zones that move when I rotate the cab. Trying to rule out bad electrical ground in the building. The built in degauss makes no difference. Should I get a...

Can anyone help identify this chassis? It’s in a system 1 cab but pretty sure not original.

Wanting to work a trade for Addams Family Pinball machine. I have an upright Star Wars and Marble Madness to go towards making a deal.

Both of these PCBs are working with no issues: Willow - $450 shipped Double Dragon - $150 shipped

I’ve got a pac cab with a WG4600. Any alternative chassis models interchange with these tubes? It’s been capped and I’m beating my head against the wall to adjust it. Just can’t get the picture centered. It’s too low at the bottom. I’ve adjusted the horizontal sync and can’t get it looking...

Working Double Dragon PCB - $145 Shipped CONUS

Working with no issues: Willow Tron Double Dragon Legend of Kage

I just acquired a Rock-Ola GP 160 (which is also considered a model 432?). This machine was pulled and stuck in a warehouse about 25 years ago. From what I can tell, it looks like it is all there. It powers up with lights and all. You can make a selection (hearing the clicks and the 'make...

I've got a dedicated Robotron that has zero control response. No joys, no start buttons. I've double checked wiring. I've ran an additional ground to the CP. Nothing has helped. Is there a usual suspect on the controller board?

I've got an AMI Rowe CD100E juke that Has a couple of issues. This has been in a closed bar for years. Everything powers up fine. Initially when you selected a CD the arm would set it down but the cd would not spin. It would pick back up, put in carousel and then repeat the same sequence...

I've had in storage for a long while a Bride of Pinbot for a friend with a flipper issue. The idea was eventually I'd look at it. I have zero experience with pinballs but the time has arrived to finally see if this is something I can tackle. The story on the machine is as follows: The left...

The backspin function is at location 20 on the Jamma connector. According to schematics it goes to pin 6 on the IC at U56. Anyone know if this is a straight path from the Edge connector or is it going through a resistor not listed?

I have no need for these and don't want to just throw them away. They came off of a Blood Brothers Control Panel. If someone wants them, I'll stick them in an envelope and mail them to you.

I bought this Multi-williams metal control panel from someone here a few years back. Finally getting all the pieces together to build this machine and I'm not sure what joysticks to use. You'll see in the picture this panel has 4 mounts on the backside for the joysticks that are about 1 inch...

I have a MsPac/Galaga Class of '81 pcb in an original Ms Pac with a lizard lick adapter. The wiring doesn't have a test switch and I'm wondering how to get into the setup? There is a spot on the board that has 4 test points in a square. Should I ground one of these to get to the soft menu?

<SOLVED> Marble Madness Graphics Issue - blank spots I had a voltage spike that wiped out the graphics portion of my Sys 1 Main PCB. So, I picked up another Main PCB. On first power up with new main PCB, I received a Software Exception error. Cycled the power and what I have now are sections...

Looking for a working Atari System 1 Main PCB w/LETA chip. It seems that dab of glue on the 5VDC potentiometer on the AR3 board IS there for a reason.. :(

Anyone have any input on an AMI JEL-200? This one is mostly working but has a selection issue. According to owner " It has a mechanical problem in that it will play the odd or Hit side of record fine, and it will select the even or back side but will not cancel the selection-you have to...

I need to unload this: http://waco.craigslist.org/bar/3308488166.html open to offers

Working dart board with darts and tips...has the top light, just not pictured. Not wired for sound, but I've tested it with a speaker and the sound works. $200 - Located near Waco.