Search results for query: *

I have a working ION 2008.5 that I just got working again after spending a year on the shelf. I am worried about the key battery dying. Has anyone ever tried to solder a new battery in parallel with the current battery? Seems to me if that could be done, it would prevent the key from dying. What...

I have a 4-Slot Neo Geo with a video RAM error. Address Write Read 0000060F AAAA AA2A I think it is the RAM at L9. Can somebody confirm that? If so, do you know where to get a replacement?

I have a Stargate CPU board that has a video color issue. The game works but the screen is tinted all red. I know that the ROM board works because I have tested it in another CPU board and it is fine. Any ideas for my to try? Thanks.

I am looking for a working Defender ROM board with ROMs. Let me know if you have one. Thanks.

I picked up an MK2 that is not working. It looked like the PSU needed to be replaced because the 5V line was dead. I replaced the PSU and the new PSU 5V line was dead too. I disconnected the 5V wires and I read 5V. Reconnected the wires and removed the JAMMA connector and I get 5V. I organized...

I have a Billabs BL24C90T in a Golden Tee that looks great except for significant trapezoid. The remote board has pincushion adjustment but no trapezoid. I am looking for the manual or if anyone knows if there is an adjustment on the chassis. If not, what parts need to be replaced. Thanks.

I have a nice DK machine that has intermittent loss of a vertical lines of graphics in the barrels and/or DK. Everything else os OK. I have replaced RAM and ROMS. Could it be the PSU? The +5 is a little low. The -5V and 12V are right on. There is a KGD-23S PSU in it. Does anyone know if there is...

I just picked up a nice Stargate. Everything is working except the lower left ball gate. The previous owner said it never worked and he removed the arm. I installed a new coil and arm. I wired it exactly how the old coil was wired. The coil is immediatley energized when you turn it on. I went...

I am struggling to get a med res monitors working for my Cruisin' USA. The unit had a U5000 chassis with a Zenith A63AGD01X tube. This tube had no red. Swapping the drive transistors did not change the missing color. The chassis seemed to be fine so I tried to rejuv the tube. It tested poorly...

I am attempting to use my Super Mack CR31A for the first time on a Zenith tube. The tube number is A63AGD01X. Does anyone have the tube setup chart that has this tube in it? I do not have the Tube settings chart. I found the B&K tube settings but t does not have all the settings listed. I am...

Does anyone have the helicopter blades plastic for sale or have a scan of them?

I have an opportunity to buy my first pin. I can get a nice LW3 for $700. The right flipper is intermittent. That is the only thing wrong with it that I know about. Is that a decent price? Anything I should look for when I go see it?

I have the opportunity to pick up a nice Dungeons and Dragons pin. The unit is not working with this message displayed: "check Fu-1 or Field Fuse". What would be a fair price for this? The owner is asking $500.

I just picked up a GT 2002. The games gets to the Load Game Complete and then reboots. I have checked the 5V and 12V lines on the PSU and they are OK. I have also replaced the HD which produced the same result. Any ideas?

I can get a working UltraCade 2000 in a nice conversion cab for $350. Monitor is in good shape with no burn. It has 4 game packs installed but no CD's come with it. The packs are: Capcom Classics 1: 1942, Ghosts 'n Goblins, Section Z, Vulgus, HiGeMaru - Pirate Ship, Legendary Wings, Gun Smoke...

Anyone have a PDF of the Open Ice manual?

I am looking for a working Revolution X game PCB. Anyone have one for sale?

I have a Blitz 2K with a 1.4 boot ROM and 1.5 HD. The game plays fine but will not allow me to change any CMOS settings. Everything is invalid or fails, even the factory restore. Also, the additional settings menu has all the menu items duplicated. Does anyone have any experience with this. I...

Anyone have a scan of the Open Ice CPO?

Anyone have an Area 51 marquee for sale? The dimensions I need are 23 1/4" x 7"