Search results for query: *

i just got a battlezone upright on a trade, previous guy also got on trade was told working he never tried it out. i looked it over, had a unusual board leading to the monitor , looks homemade. harness wasnt plugged to monitor. plugged harness into monitor, tunred on and nothing. marquee, coin...

hey guys, my joust popped the BR1 in the PS yesterday, put a full kit in all V's test out now as they should. i lost all of the P2 controls, pulled the interface and swapped with a spare same condition. today i pulled the interface and powered up and put to switch test and without the interface...

hey fellas, trying to get my backup deflection board going, have neck glow and chatter, think the spotkiller led is toast because its not on , nothing showing on the crt. Q7 and R6 get super hot as soon as i power it up. any ideas what to look at? anyone have a guide for test points for Vdc/ac...

my tempest died as soon as i finished it and moved it into the house. PS are all good, 1&2 lit solid, crystal checks out, A6 pin 6 12mhz, what is stumping me is pin 5 on C4. with it in or out i have 24mhz on pin 5, 3 -18mhz nothing on 6 . pin 11 of D5,D6,E5,H5,H6,F5 all share that 12mhz on...

http://www.ebay.ca/itm/Wells-Gardner-NOS-K6100-K6400-X-Y-Flyback-Transformer-/172590411763?hash=item282f30aff3:g:d-0AAOSwLEtYlMH7 not my add but i ordered two , have 15 left.

looking for an atari cocktail plexi ( tempest) i think someone used mine as a welding shield once upon atime , i polished out the scratches but has about 50 little burn holes about 1/3 into it.

Has anyone seen these in person? http://www.ebay.com/itm/151554835423?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Mine is missing and ordered one but was looking for feedback

hey fellas! finished my SW and am moving onto a tempest cocktail i got yesterday. 6100 works decent enough for now ( tested in my SW has all colors) previous owner used a jamma connector for the main board (avg) and his wiring is fugged right up :( i was able to kind of get a pic but only in...

finally got my AVG board working 100%!! first game damm monitor crapped out :( the VR1 on the HV board blew apart! a chunk missing!! ( i just recently did the full deluxe from Ian ) put the old one back in and its dead. i have no neck glow, i had a new HVT and put that in and nothing. spot...

recently resurrected a dead avg board , although it still has something messed up with it . the bottom 1-1/2 inch is wiggly and messed up. please see photo's . it is something common in the out put as when its in the grid screen and i change between the colors it shows the same systems. it...

after much guidance from Doug, my AVG board has come back from the dead. from help with what to check, basic understanding of theory of operation, even reading the crappy atari schematics we got this working only using theory rather than a shotgun process of elimination approach and changing...

have ( HAD) a ripple in my SW amplifone on the X axis. put the full amp HV and deflection kit from IanKellog in ( minus the mods i want to get it working first then move onto those) and still had the ripple. pulled apart the neck board and cleaned the pins, no change. onther known working board...

hey fellows! anyone know what size and where to buy the molex pins atari uses ?? i am going to start my amplifone rebuild soon , they are smaller than .93 and bigger than .62 almost right in the middle , any ideas?? i did my yoke rebuild with .93 and they where the male side so i was able to get...

hey guys, finally brought my SW upright home for a teardown and restore. never had a working sound board in it and decided to go through the trouble shooting manual. grounding t TP tabs on SB doesnt do anything. testing pin 3 on 3K processor shows it stuck low. grounding the TP on the main as...

found a samsung 19" tv that was left in one of my rentals. pulled the neck board off and a neck board from a wg 4600 fits perfect! could you guys give some pointers if i will have to change the deflection yoke also? if i just try it you think the deflection yoke might cook the chassis? i think...

WTF is with the funk smell every single cab has? and it's always the same funk smell???? it's so knarly even my wife has picked up it and if i go picking for cabs and find something and hide it in storage i get busted because of that dam funk smell!!

anyone seeking a decent fire fox cab? its gutted :( cab is in nice shape, plexi nice, all alum also. cp full of holes like swiss cheese :( headset volume control is intact and decent also. will post pics tomorrow . alum, plexi, volume control will go to ebay this sunday and the cab to the...

my mrs pac plays normal until you eat a power pellet then the ghosts turn into red chilli pepper looking things, my son says they look like red nerds ( the candy) anyone ever seen this before? any ideas what i should be looking at to correct this? ill post a pic tomorrow i am beat and hitting...

just wanted to mention that i really enjoy this forum! i have been a member of car forums, pinball forums and many others over the years , and this one is really the best!! there is sure a good bunch or knowledgeable guys here whom actually respond to problems and questions posted. its a very...

hey guys, before xmas my sanyo 20ez crapped out. today i did the deluxe cap kit, new flyback, new b+ pot. reflowed a bunch of other items as per the flow chart. i did not pull the resistors out to test ( in the first few steps in the flow chart i will do that tomorrow, B+ is a bit high) plugged...