Search results for query: *

I've got a ArcadeSD board + SD card for sale, will take 250.00 shipped. Currently has a 2g SD card installed. It's installed in my multicade machine at the moment, but I think I'm going to restore that machine back to a dedicated mspac. 250$ via paypal, shipped via UPS ground.

Figured I'd post there here before going to craigslist: 1 - Stargate, fair to good condition (some chipping along bottom edges, and typical wear, a burn or 2 on the CP, but a new overlay would fix it right up). Monitor is bright and clear (fresh rebuild). Has a switching power supply, so...

I'm trying to get the lower speakers out of the New Orleans I'm converting, and I can get access to the speaker chamber from above (there's a panel that comes out, and gives you access for I'm guessing wiring purposes), but the opening is too small the pull them out of the cabinet. Anybody have...

Hate to do it, but I'm selling the 60-in-1 (v1, single trackball capable) that I got in a couple weeks ago (powered on, and verified to work, then shut down since then). 100.00 Paypal, Shipped via UPS, US only. *SOLD I'm also selling the 48-in-1 that the 60 was to replace, about 5 hrs on it...

I tried to sell my 'Orleans whole, but I think I'm going to pull the entire CD mechanism, and adapt the cabinet over to a PC/MP3 setup (I think the guy who bought my New York may want the mech & left over parts for spares, since they share the same electronics). I've played with it a bit as-is...

It's not exactly Arcade related, but can someone decipher a SMD cap value for me? It's marked as 6e 100 10v. I'm guessing the 6e is the package size, the 100 is 10uf, 10 volts? I'm trying to find one, but couldn't find one with those values on Mouser, but I'm not 100% sure I've got the values...

I'm looking for an empty Midway-style cabinet, doesn't need anything in it at all (don't need monitor, power supply, boards, etc). I'm looking in my area (hour, hour and a half drive from Conover, NC or maybe a bit over depending on price/condition). I'd like a good solid cabinet, and would...

I've got my Wurlitzer New York up on ebay, and my auto-accept on best offers is 375, if anybody here near me wants it. I can also move it to our Charlotte office (which is about 10 minutes from the Cargo terminal at the airport there, if that far), which also has a loading dock if you can have...

My New Orleans player seems to be developing a rather nasty problem with throwing CD's when it's trying to pick them up and put them back in the tray. It LOOKS like the box the CD drive is installed in is not moving to the right once the CD stops, and the arm that moves to actually grip the CD...

I've got a Wurlitzer New York, NY that has a bad CDM3 in it. drive will spin the first disk that gets in it, no TOC is read, but any disk after that it just kind of twitches back and forth a few mm, but never actually spins. I pulled a the drive from my New Orleans and put the CDM3 from the NY...

Anybody selling these boards resonable? I'd love to put one in my Stargate cab, and get the control panel that's pre-made for it (definitely don't want to gut the 'gate tho, it's in too nice of condition). Might also end up getting 2 (have a defender cocktail that would be a good candidate for...

Would there be any problem connecting my new VisionPro monitor to my Isolation transformer in a Mspac cab? Or would I be better off splicing the monitor into incoming power?

Anybody have the manuals for these 2 jukes, or know where to get them? I've hunted several juke sites, and they just don't seem to have the manuals for these. I'd especially like to get the one for the New York, I'm having a couple issues with it (mainly, sounds like an amp is turned on full...

I have stuck 3 different monitors in my Ms Pac cab, but they are all doing the same thing, looks like there's something that's distorting the color on the monitors. I've tried 2 k4600's, and another I'm not 100% sure of the brand, all looked great before going into the cab, but once they were...

Anybody out there know if there are stencils for Scramble's side art? I've got one that had formica attached to the sides with some sort of red-colored glue, but I'm not sure if I could get the glue off of it without damaging the near-perfect artwork underneath. I guess I could always trace...

I'm looking for a Wico 8-way leaf switch joystick, preferrably NOS, and the monitor mounts for a MS Pac cabinet. Could also use a mount place for the joystick on a MS Pac CP.

Got 2 more monitors I need to ID, and I tried Bob Robets' ID pages to no avail...

I'm in the process of converting a previously converted Stern Scramble cabinet to a 48-in-1, and I'm having trouble getting the adhesive off of the control panel. I've used Goo-Gone, but it's still got lots of adhesive on there... I've gone over it about 3 times so far, and it's just not...

Anybody out there got a k4900 cap kit checklist/location sheet? Found one for my k7000, just can't find one for my 4900's...

I've got a WG 13" monitor I need help identifying. Came out of a old poker machine, but I'm going to put it in something else, and it definitely needs a cap kit... Any help would be appreciated!