Search results for query: *

I have purchased a broken Nintendo Space Fever cocktail and am trying to bring it back to life! The screen is currently showing a series of horizontal lines, with a small section flashing rhythmically towards the bottom (the screen it is running to horizontal but working on the principles it...

Have recently picked up a Nintendo Space fever cocktail - the monitor had a broken LOPT that there is no current replacement for so that has gone out into the garage for storage. I have wired up a tv via a rgb scart (the tv works well with a jamma signal so i know it is wired up correctly) and...

as per the title, i need a flyback for a Sanyo 14" cocktail monitor, the part number seems to be F5019. Cheers Karl

... and where would i get a new flyback (any idea what the part number is etc so i can google for suppliers) for it - came out of a Nintendo cocktail. Any and all advice appreciated as usual! http://imageshack.com/a/img585/8647/o6gu.jpg http://imageshack.com/a/img15/9130/swbq.jpg

On switching on my new cab there was a hell of a buzzing noise followed by sparking and a nice little puff of smoke - looking at the crack and marks across the top of the flyback i guess that was the problem! I believe the monitor to be a Sanyo 14EZV so can anyone help me with info on exactly...

Hi, I have just picked up a pretty butchered Space Fever cocktail, the wiring is not in good condition! Basically, there is nothing coming out of what i assume is the main power board so i need to wire new connectors - i guess the plastic block at the top is where the power comes out for the...

Nintendo Space Firebird cocktail cpo artwork - available anywhere? I am trying to tidy up a Nintendo Space Firebird cocktail and the control panel overlays are a little rough. The cabinet has been hacked about to run Pleiades by Centuri and as i really like the game i am thinking of converting...

I have a Space Firebird cabinet in need of restoration and need the following parts: 1 x glass clip (although would be interested in more than one if they are in very good condition as mine are a little rough) Full set of button tops - the plastic tops for the buttons on this machine screw...

After much research i have found the monitor in my cocktail to be this one: a Sanyo that was originally fitted to Atari machines - as far as i can tell its known as an Atari TM-157. I just cannot get the vertical hold to 'hold' - i have removed the VR353 pot and checked it, it seems to be...

Monitor V-hold pot - replace with different value pot? I have what was once a Nintendo Space Firebird cocktail, it was converted to run Pleiads by Centuri. It has a Sanyo tube and chassis in it and as far as i can tell it is an EZ20 variant - it isn't in a type of cage with the chassis mounted...

the sequence of events is as follows: switched GORF on, it seemed to be 'resetting' during the attract screen, not completely going of just doing the 'long live gore' bit over and over and the screen flashing. if i pressed the 1 player button though i could play the game with no issues at all...

Burgertime cocktail - sound problem after power board rebuild i have a dedicated USA Burgertime cocktail, when i got it it was running off a switcher although the power board was in the cab - the seller likes switchers for reliability and puts them in using the arcadeshop kits so no wiring is...

Here i go again with a problem... I am tending towards this being a board rather than a mionitor problem as the monitor is clearly getting the 3 main colors - the monitor test pattern should show the following sequence of colors in bands across the screen; red, green, blue, white, black...

Model number is A042-90421-C000 Burgertime I have 12V spot on, but +5V is showing as +1.18V and there is no -5V at all. any ideas on how a technophobe could sort this, or at least find out where the problem lies?

My star wars plays fine but there is no sound at all... I have checked on the ARII and am getting a reading of 1 for the -5V, and it is the same on the test point on the sound board itself. Is there anything else i can check or is it looking like the ARII is the problem? any help greatly...

All the self-tests come back ok, the game works fine, i just have no sounds at all. I have tried reseating the chips etc but with no improvement. If i turn the volume know right up i can kind of hear some interference but not much so at least i know the speaker is working I am very much a...

Sinistar is a bit poorly - switched it on and get this on the screen.... http://youtu.be/KdFtGu1Mqls loads of garbage on the screen, the colours are all wrong and are different pretty much each time i switch it on and off cant seem to find anything through the self-check screens so any...

I am looking for either or both chips please, or a full boardset, must be tested working. I am in the UK so am happy to pay a premium to anyone willing to ship here.

Played Gorf today, as soon as i moved right it went into auto-fire mode, plus there is a loud hissing coming from the speakers - anyone got any ideas? It is only when i move to thr ight - the ship then goes to the right and down, and the missile triggers constantly. This, coupled with the...

As per the title - my GORF joystick is a bit clunky and i figure a new centering grommet will fix it. I am in the UK so would need it shipping to here but of course i am willing to pay a premium for this... cheers! chubs