Search results for query: *

Anyone got one they are willing to part with? J

Howdy! Before everything went sideways, I got a job working with the UNH Franklin Pierce School of Law here in New Hampshire. The school is renown for their work with intellectual property law and so the law library has all sorts of fun, yet tangible, legal memorabilia in glass cases to look at...

Hi, I’m swapping out a power supply and JAMMA harness for a UMK3 restore. The old power supply is labeled AC 115 across two terminals. The new one has AC/N and AC/L listed. Which wire goes where? I can’t find a schematic for the Peter Chou supply... anyone have any insight into this...

Got my NBA Jam board this morning and it was playing fine. After a bit, the screen did a 1/5 roll and I pulled out the tray in my dynamo Jamma cab to adjust and the game reset and monitor went gray. Now it won't turn on or play blind. There was a smoldering electronic smell that I hate to...

Trying to figure out what these are so I can sell them and get them out of my basement. 1. This one came out of a Golden Tee 2005 Fore cabaret (I forget the official name for the mini). It has a VGA cable coming out of the neck board. 2. I think this is a Sanyo 20EZ because the burn-in on...

I’ve got a freshly rebuilt U2000 chassis on a tube whose days are pretty much over. I want to do a tube swap, but I’m not sure if the extra tube I have will be compatible with the swap... Here’s a picture of the tube and the neck. I got the tube from a junk Lethal Enforcers and it never...

Hello! My buddy just sent me this stumper. He’s working of a circuit board for something that works in salt water (not game related, sadly). He wants to change out the circular component in this picture. With a replacement... But when he went to desolder the old component he discovered...

Help: Original NFL Bilitz 8-way to 49-way Joystick Conversion Hello! So I have an original Blitz pcb in a cut corner conversion and I am trying to figure out how to wire the 49-way joysticks into it. I've got the joysticks... The control board.... ...but I can't find a definitive...

So last night I did a cap kit on the 12" (I think it's 12") monochrome monitor and brought it back from the dead. Today's issue was supposed to be trying to get the dartboard itself to register the darts thrown at it (it's not doing that). I reseated the ribbon cable from the switch matrix and...

I've got a Golden Tee 2005 that I necked the day after I got it. I bought a replacement tube and went to do the swap tonight. However, when I sat down to start unscrewing things, I noticed that this donor monitor used to be in a Nintendo cab (the chassis that came with it has the plug, flyback...

After having a 60-in-1 for a few years now, I've noticed at when I play Dig Dug secretly I wish I'd chosen to play Mr. Do instead. Don't get me wrong, Dig Dug is a fun game. I remember having it on my C64 back in the day... But, when you place Mr. Do and Dig Dug side by side, Dig Dug is just...

I'm rebuilding a k6100 and encountered a cap that seems out of place. The kit says that C905 should be 33uf160v, but the cap that's there is 47uf450v... Is there any reason this cap would be such a different value than what's 'supposed' to be there? All the other caps are spot on... What do...

Anyone got one lying around that they want to get rid of?

It was a top down scroller that had something to do with time travel (I remember a level with arrows... Maybe Aztec?)Two players from the future could play at the same time. You could upgrade weaponry getting power ups. The joysticks (octagonal in design) would spin and so you could shoot...

I've got a u2000 on which I recently did a cap kit and flyback replacement. I just moved to New Hampshire and in the move one of the wires off the flyback broke loose off the neckboard. I, of course, found this out after I plugged it in. After snooping around in old forums posts, I believe the...

I need 8-12.... J

Hey y'all! My Rastan board is fritzing out and I have tried everything I can and still can't get anywhere with it. On powerup, the screen is scrambled, but you can tell that it's trying to the graphics from the colors that are displayed and the motion of the scrambling (if that makes sense)...

Anyone looking to get rid of one of these? The one with Robotron, Mario Bros., SMB, Ghosts and Goblins, Joust... Thanks, J

Awhile ago I traded a Gauntlet Dark Legacy for an NFL Blitz. The cabinet that held the Gauntlet was a two player Dynamo cab that needed some TLC (to put it nicely). The vinyl was peeling and there was slight water damage at the top. Rather than junk the cab, I decided to make a custom NFL Blitz...

I have an old Dynamo cabinet that had cracked vinyl, strange bolt holes in the sides, and a tiny bit of water damage. After removing the vinyl, I can't get the particle board sanded flush (the particles ping off when I use my palm sander)... Before sanding, the particles are 'proud' of the board...