Search results for query: *

Complete Atari Star Wars board set (3 boards + Interconnect). This board set has been recapped, tested with some burn-in time. It is completely working and will be shipped in Anti-Static bag. Ready to plug and play provided your power supply and ARII regulator board are good. $325 shipped, Conus

A full set of decent quality Atari Star Wars Side Art. I picked this up several years ago for a SW cockpit project and never used it. I am not sure who produced these, but it looks to have been done from scanning an original cockpit and some of the objects and lines are not as crisp as the...

Atari Star Wars wiring harness for an upright. It will work on a cockpit with some minor modifications (mainly the speaker and back light wires). I used this for a test bench setup before moving to a PAT9000. $65 shipped, conus.

Two - 100% tested working Atari Tempest board sets for sale. Boards have been recapped, interconnect headers re-flowed, and burn-in tested. Board sets are shipped in an anti-static bags. $225 each shipped, conus

Fluke 6502 pod; Self Test OK. All pins good. $225 shipped, Conus Fluke Z80 pod, Self Test OK, One pin has been repaired (see pics). $150 shipped, Conus Or $350 shipped, Conus for BOTH

Two - 100% tested working Asteroids boards for sale. Boards have been recapped and burn-in tested. Boards are shipped in an anti-static bags. $125 shipped each, Conus

Three control panels for sale. Burgertime, complete with harness, needs CPO, some surface rust on joystick frame. $50 + shipping Joust, completed with harness, $75 + shipping SOLD Donkey Kong 3 (DK3), stripped, $10 + shipping SOLD

Used Bally/Midway Over/Under Coin Door made by Coin Controls. It has the metal enclosure and a coin bucket. No locks. $35 + shipping, or local pickup in Raleigh NC.

Brand New Happ Over/Under Coin Door with Locks, Cashbox and Full Metal Enclosure; PN #40-0038-00 Comes with extra set of red eject buttons. Lists for $150 $100 + shipping, or local pickup in Raleigh NC.

Tempest Upright Control Panel. Complete except for the spinner knob. Overlay needs to be refreshed; Otherwise, fully wired and ready to go. $50 + shipping or local pickup in Raleigh NC. Thanks. Kip.

Working 19" Wells Gardner 19K4675 monitor with minimal screen burn and good color. $50 + shipping or local pickup preferred. Located in Raleigh NC.

B&K 467 restorer/analyzer with the two adapters used by many arcade monitors (CR23 & C24). Unit powers up and all three meters adjust with the controls. I have not taken it through all steps, but it appears to be functional. The case hinge and case catch are broken; Otherwise, a solid unit...

Tempest Upright Main Harness. Very good condition, clean, no cuts, complete including switches. $50 + shipping

Star Wars Monitor Shroud. Should work on both the upright and cockpit. This one came off a cockpit. Only one cigarette burn on the lower right and graphics are decent. Very usable. $75 + shipping. Thanks, Kip.

I am looking for a metal frame (sides and bottom) from a 13" monitor (any brand should work). I don't need the tube or the chassis cards. So if you have a bad/dead 13" monitor and can strip the frame off it, let me know what you want for it. Thanks. Shipping is to Raleigh, NC. Kip.

100% working.... WG19K6100 Monitor fully rebuilt with Bob Roberts deluxe kit, ARII board rebuilt, Power Supply rebuilt including new big cap, Game boardset re-capped and fully tested including burn-in, and new main board connector installed. Cabinet is solid and in decent shape with typical...

Help! RGB Color weirdness - Apple IIGS/Pacman/Pat9000 All- I could use some help understanding this RGB signal distortion issue. Background: I have a working Pacman board running through my PAT9000 with a Apple IIGS (A2M6014) monitor attached as the Raster display. I am seeing...

I would prefer not to create something that might already exist... Does anyone have a 9010A test script for a Atari Star Wars boardset that they would care to share? I searched all the typical Fluke 9010a websites, but didn't see anything posted. THANKS.

Does anyone have (or came up with) a Jamma Plug wire routing for the PAT9000? I have seen a small picture of a Jamma Plug (utilizing two DLP156 plugs) that someone put together, but I have no information on how it was wired. If anyone has something already documented, it would save me some...

I am looking for a G07-FBO for a project. I definitely need a good tube and frame, but would like to find a complete monitor, if possible. Does not need to be working. Please PM me with anything you might be willing to sell. Shipping to Raleigh NC 27613. Thanks, Kip