Search results for query: *

I was thinking I needed that card. I'll order that and post some pictures.

You were right. I got it working by going into the game to reassign it. Now to connect it to the Sanyo crt monitor. Any idea on that? That's the last thing I need to do.

I am using the jpac jamma edge connecter and jamma harness to the buttons. When I pull up ipac/jpac programmer it only gives me an option for key or mouse. Game pad is greyed out. I will send pictures but not sure how to post them on the thread. I've never had luck with it before. Thank you for...

I will try that. Where do I hook the ground for the harness? Obviously I don't need the 5v or 12v because it being a pc but the buttons will still need a ground right?

I am trying to finish my Fix It Felix build and having a problem trying to install the Jpac. I downloaded the software but am unsure as to how to configure the board to work with the Jamma harness. The buttons are wired up and correct and harness is plugged into the board and the board is...

Chassis number

Without the lines

Below are the pictures I've taken. Tried to adjust the green lines out and I can get them to go away but it causes tails on everything when I finally get the lines to vanish. Please help and let me know where to start. Thank you. This is for an Aerosmith revolution x

I'm in search of a Qbert cabinet in decent condition. Can be converted to something else or be completely empty. I live in Chesapeake Virginia. Let me know if anybody has one and how much. Will drive but not a super long distance.

Thanks you for the reply. It looks to be set up correctly for the monitor. I unplugged the i/o board and took that via cable and plugged it into the external monitor and that is what I got. I actually unplugged the vga to pc and plugged It into my laptop and the picture below was the result. It...

Pm me please if you do

Is this still available. I may need it. Mine is acting weird.

Right before it resets

After external monitor

More pictures More pictures

Please help with my target toss / bags game not working I purchased a target toss that what I assume had monitor issues. I get it home and I have no picture no sound. I did preliminary checks with the help of some friends and during these checks the situation changed. First I checked...

I am looking for NOS white buttons for pacman, ms pacman, and elevator action type games. Anybody have any please let me know. much appreciated.

Thanks I will give that a try and see what voltages I'm getting. Make take me a week or so to get to it.

Went through and reflowed a bunch of joints and now the monitor is perfect color no scrolling except this is the picture below. The "player 1 and "high score" are now in the main screen instead of at the top of the monitor and the "credits" is just below that instead of at the bottom of the...

I did not check the video cable wire not the resistors. Please forgive as I have no idea how to "reflow" the chassis and the neck board. In new to this and don't quite know all of the terminology. My question is also why did i get it perfect but then the very next night it doesn't work? Do you...