Search results for query: *

Can someone tell me the difference between tms4416-20nl and tms4416-15nl

I've been out of the game for awhile and I need to burn some roms to repair a game, is there anyway to hook this up to a modern computer?

I haven't worked on a monitor in years, my neighbor got a game from his grandparents with a dead G07 and asked me to help him fix it, I had a monitor out of a ms pacman that worked about 10 years ago when I pulled it out. I installed it and it seemed to work fine and then the screen started to...

I have a complete coney island pinball machine, its in ruff shape but someone might want to try and save it. It had the usual battery damage, I have cleaned it up and replaced alot of parts but still does not boot. Looks promising but I don't have the room anyway, I was trying to get it working...

Sorry if this upsets anyone but I was hoping someone could help me source this part. Its not arcade related but you guys no where to get parts and someone might know where to find this. Any help would be appreciated.

I made a bunch of mistakes, it started out when my monitor would get hot the screen would loose sync or the screen would get garbled, so I recapped it, carelessly I put a cap in backwards and the cap blew up, it was along time ago and I don't remember which one, I replaced the cap and the...

I had a perfect working Data East Playboy pinball then with out warning the displays totally went black, I took out the power supply with out testing the voltages checked all fuses and they were good. In the lower left portion of the power supply I found a bad diode and probably a bad cap I...

So a few months ago I picked up this game for gas money about 50.00, with the hopes of fixing it. It doesn't need too much a rope light a red flasher light and two of the 8 trucks fixed and other odd and ends its in okay condition. No ticket dispensers included. It looks like a fun project but a...

trying to help another member here, not sure what monitor it is but here is a screen shot. I'm guessing a k7000 but not sure yet, have not seen it in person. The flow chart only suggest a cap kit and I'm not sure that will fix this, any thoughts.

I got a monitor out of asteroids I think based on light screen burn, is there a easy way to test it? I have no vector games. If anyone in so cal can test it or is looking for one let me know. It looks fairly clean light burn all the boards look good though but the guy I got it from is unsure on...

I have a gutted z-back cabinet and a empty table top pinball cabinet both are pretty much just wood and glass, no coin doors. I just picked them up and would rather pass them on then re arrange my game room to make room. It is suppose to rain tonight so I would act quickly as they are outside...

I have a happ trackball 2 1/4" I think green boards I hooked it up to a 60 in 1 and everything worked well for a week or two now it only goes up and down or left to right if I change boards around I tested everything on the board except the optic sensor and chip because I have no Idea how to...

I have a happ trackball 2 1/2" I think green boards I hooked it up to a 60 in 1 and everything worked well for a week or two now it only goes up and down or left to right if I change boards around I tested everything on the board except the optic sensor and chip because I have no Idea how to...

I'm converting a computer based solitaire poker machine into a 60n1 I used the original computer power supply with the original monitor that was plugged into the computer power supply. Well of course after I finish everything the power supply dies so I'm just going to put in a regular arcade...

I won't say it has the coolest arcade I have ever been in but by far the most expensive. I just went to the new store in Moreno Valley ca. Tons and tons of candy cabs and other imports the don't use coins but all the coin doors where still in yen. The owners most be Japanese as they had crane...

Okay so I have a 25" kortex monitor I have asked and looked everywhere for a schematic with no luck, I need to know what diode d903 is I can see what looks like a "U_156 on the top and _9461 on the bottom where the _in the codes above the diode is split and I can't make out the whole number I...

Kortec ktmf 2641m anyone know where to get a schematic?

Anyone ever have an arching coming from the neck board socket? I was working on an unknown chassis tonight did a tube swap the ohms in the yoke were off by 5 didn't have anything else to use so we tried it anyway every thing worked okay bad picture of course but when we tried adjusting the pin...

Anyone have any idea where to get a coin box like this or any thing that used it? it is off a kiddie ride I'm restoring. I know I have seen it but I can't think of where or where to buy one mine is rusted out past repair. Mine is very similar to this with out the ticket door built on, on the...

I'm looking for a coin door for a kiddie ride it looks just like this one with out the ticket holder portion on the right. I would also be happy with just the cash box for it.