Search results for query: *

Hello! Are there any Atari experts available that can assist me with a 720 Graphics issue? I am finishing up a restore for a friend and just fired up the 720 to play the first actual game and have noticed this strange zig zag line. On one side of the line, the graphics seem fine, but on the...

Do we have any 720 wiring experts in here? Normally I can figure this stuff out with the manual pretty easily, but this time around I have a hacked 720 harness and the wiring colors seem to be off from the manual I have... Can anyone confirm if these chopped off wires are the wires that should...

Most of these CP's have been converted with the exception of Galaga... Top Row: Galaga, Pacman converted to ?, Frogger converted to Qbert Bottom Row - Both were Nintendo Donkey kongs converted to something else I can take more pics if there is something someone out there would like to see...

Good morning KLOV! I have been sifting through past threads but can't seem to find one quite like the issue I am having and was wondering if anyone has any ideas or maybe has experienced this... Sanyo 20 EZ - Came to me non-working... I set up a test bench to see what signs of life it was...

4 total Sanyo 20 EZ chassis (for Nintendo) these have been on a shelf for years - one has new caps and new flyback, one has new caps, one is original and one is missing caps... Not sure of the status of any of them (working vs not working) but I think they all have some sort of issue. Asking $60...

Good morning - I have a qbert pcb, PS, and filter board available for sale - All three have issues... PS is touchy but does work some of the time.... Filter board has cold solder joints, and pcb doesn't boot. All may be a good repair project for someone who repairs boards.... Asking $175...

In case anyone is interested, here are the results from the Arcade / Pinball Auction in Tennessee yesterday (8/29/2020)

Good afternoon guys, I wanted to share the Arcade / Pinball auction results video f on yesterday in Tennessee in case anyone was interested. This auction was a little different then the rest as they were attempting to have social distancing. If you like the video, there are other arcade auction...

Available is a Mario Bros PCB with issues... See pics of condition and what happens when powered up. Asking $100 plus shipping or towards trade for dkjr PCB.

Available here is a nice looking but not working qbert PCB with issues. Sound board will most likely have issue as well. Visually I can see one disc capacitor broken on sound board. The main board boots to the screen shown in the picture here. Not sure if anyone is looking for an original qbert...

Working mat Mania pcb (don't mind color in pics, monitor needed work) includes harness, Marquee, and manual asking $150 shipped.

Anyone have a good source for R609 resistor on a Sanyo 20EZ? Every place I've checked doesn't stock them and the lead time is between 7-22 weeks... Here is an example on Digikey https://www.digikey.com/product-detail/en/vishay-dale/CPR20180R0JE10/CPR20180R0JE10-ND/5814588 Anyone have a good...

Non working pole position pcb. Has typical acid damage due to battery leakage. Not sure of there are other issues. Again selling as not working. Asking $75 shipped. Sold!

Working Mat Mania PCB, I will also include the harness, marquee, and paper manual. (note - Control panel not included as its too costly to ship with the package) Asking $100 plus shipping.

I have an original but working g07 chassis available. Works but looks like it needs caps. Asking $75 shipped

Missing bullets from both sides as well, but has anyone ever see an example like this? The 008 and Reverse EDCF are from two separate power ups. This happens when the enemy is shot, instead of the explosion Sprite. Also when the enemy dive bombs same error Sprite is displayed. Can't seem to...

Made a rookie mistake tonight.... Sanyo was working with a horrible picture, pulled the chassis out and recapped it. Hooked it all back up and had no picture and a b+ of 0 when I applied power. Quickly realized that I was in a hurry and forgot to clip all of the leads on the caps. Pulled the...

Available here is a lot of pole position boards with various issues... Some are marked as watch dog issues, one has a pole position 2 sticker on it. I have no way to confirm these diagnosis are correct. I am sure none of them are working 100% I have no idea on the price so I'm going to ask $400...

Hey guys. I've seen the other threads about people regretting selling their asteriods cabaret. I have one I'm willing to sell in South Carolina. Looking to get $800 if anyone is interested Sold!

For sale is a tested and working Frogger PCB. Tested in my project frogger cab and it played fine. All sounds and controls worked as they should. Asking $175 shipped. Also have a spare Frogger harness I can include for an extra $50. PM me with questions. Thanks guys...