Search results for query: *

  • Users: gregr
  • Content: Threads
  • Order by date
  1. WTB - Centipede Project - Maryland

    Looking for a Centipede project, non-working, needs refurbishment. Looking for a cabinet with at least wiring harness and control panel, everything else would be a plus. Thanks Greg
  2. WTB Punch-out PCB

    Looking for a working board set for a new project. Thanks Greg
  3. Pole Position II Booting Issues

    Picked up a PP II board untested, board boots up and begins to run the 3 or 4 screens before the title screen and it gets hung-up (stuck on screen with little man), it will sit there for 2 minutes and then reboot again and continues it over and over. I have not done the 5v mod yet but the board...
  4. Nintendo PP7B power supply question

    The power supply in my DK is running low for 5v, read 4.8v and is causing some graphics issues. Positive that it is the power supply - tested the board in my DKjr cab. I tried to adjust the +5v with the variable resistor but neither of the +5v pots will budge, so much so that the plastic...
  5. Nintendo Joystick

    Looking for original DK style joystick - please PM pictures, price and paypal info Thanks Greg
  6. Lunar Lander Reproduction

    For the last 3 years I have been accumlating parts and supporting each reporduction effort that took place related to Lunar Lander with the idea of converting an Asteroids. Within the last 3 weeks the final pieces of the puzzle came together, Dokert's harness arrived and Anthony(Quarter Arcade)...
  7. Crazy Climber Control Panel

    I started restoring my Crazy Climber and found the control panel to be hacked up - the original joysticks were missing and replaced with WICO sticks. I read the restoration link on Rothblog but really wasn't happy with the results. After some research, I figured why not design a new panel that...
  8. Missle Command Help - Near Baltimore

    Anyone near Baltimore who would be willing to let me test my Missle Command Board in their machine? Thanks Greg
  9. Missle Command Issue

    Turned on Missle Command yesterday and after about 10mins the entire picture started to scramble. Spent this afternoon rebuilding the AR II and re-pinning the edge connector both of which needed to be done and was hoping that it would solve the problem. If I turn the game on and off a few...
  10. Tempest Coin Door Lights

    Just finished a full restoration and the only thing not working are the coin door lights. I measeured the blue lines in connector P40 and I'm not registering any voltage. P40 comes off the power brick through P5, before I remove the brink and see if there are any issues, are there any other...
  11. Lunar Lander PCB - Reproduction

    So, with all of the Lunar Lander reporduction work that has been completed and is currently in process: 1) Side art - complete 2) CPO - complete 3) Mission light pcb - complete 4) Mission light frame - complete 5) Control panel - in process 6) Cp wiring harness - in process 7) Main wiring...
  12. Robotron Restoration Question

    I'm finishing my Robotron restoration and I am trying to make it completely original, the last item I'm struggling with is the coin box lock out switch. My cab was so hacked-up that it was missing, so I was wondering if anyone had any pictures of how it is mounted and secondly, would anyone...
  13. 4900 Question

    Just finished recapping a newer version of the 4900 and everyting looks good except that I can see what looks like a retrace line (very faint) that that scrolls vertical. I have tried adjusting the the black level to see if it disappears but it is still noticable. Anyone experienced this or...
  14. WTB: WG 4900 Yoke (old version)

    Need an older version yoke - model number 2021111194 or 2021111201. Thanks Greg
  15. WG 4900 Issue

    Wg 4900- fixed I picked up a newer version of the 4900 not working, the thought was that it was a bad flyback, so I recpped and installed a new flyback. The picture attached is what I'm getting, and ideas where to start trouble shooting this issue. Thanks Greg
  16. WTB - Tempest CPO

    Looking for NOS or reproduction(Arcadeshop). PM if you have one you are looking to part with. Thanks Greg
  17. BUD Tapper PCB Repair

    Looking for someone to repair the sound board, game plays fine, I just can't seem to trouble shoot the sound problem - time to hand it off to an expert. Thanks Greg
  18. Tapper Hum

    Just finished restoring a Bud Tapper, including power supply and the game plays great however when I plug in the coin door harness the game produces an extreme hum. I know many people experience a hum with alot of MCR games but I was wondering if this can be resolved. I've read alot of...
  19. Bally Miday Coin Door Paint

    If anyone has been looking to match the texture finish of the Bally Miday Coin Door, I resotred one today, using Rustoleum Black Fine Texture, and it matches perfectly in my opinion, I'll post some picutres tomorrow. Thanks Greg
  20. Missle Command Died Today

    Turn on Missle Command today and all I get is a blue screen. Tested the voltage points and I'm not getting +5v to the PCB or to the control panel, the +12v and -5v test just fine. Can someone help me get started with trouble shooting this. Thanks Greg
Back
Top Bottom