Search results for query: *

  1. vintageclub

    Area 51 gun tracking problem

    I have an Area 51 board that will not track the gun for Player 2. Both guns work and swapping the harnesses results in the same thing... Player 1 gun tracks and triggers, but Player 2 gun triggers but does not track. I believe this makes it a PCB issue. I've checked continuity on all...
  2. vintageclub

    PRICE CHECK: Midway Gun Fight

    I have a working Gun Fight in nice condition with a recapped monitor. Any ideas what these are going for these days? I can't find any usable completed listings on Ebay.
  3. vintageclub

    Midway Gun Fight grommet

    Does anyone know of a source for a new joystick centering grommet for Midway's Gun Fight?
  4. vintageclub

    Nintendo Vs. resetting

    I'm learning the quirks of these Vs. Boards. It had Baseball installed on both sides and it worked fine. I tried installing Dr. Mario on one side and Super Mario on the other (with their correct PPUs) and both are having issues. I finally got Super Mario Bros to stop resetting by putting it on...
  5. vintageclub

    Neotec 500dx dot issue

    I have a Neotec 500 DX that was powered up without the 2pin ground connector hooked to the neck board. The screen is just a single dot in the center. Any hints on what to suspect is wrong?
  6. vintageclub

    Neotec 500DX ground issue

    I have a Neotec 500 DX that was powered up without the 2pin ground connector hooked to the neck board. The screen is just a single dot in the center. Any hints on what to suspect is wrong?
  7. vintageclub

    Galaga Enchancement Pack - Won't BOOT

    A guy I know has a Galaga (midway board) that works fine in standard operation. He put a Rapid Fire Chip in and it worked for a while but won't boot any longer, so he put the original ROM back in. He then tried installing the Galaga Enchancement Pack chip with the new 3J Rom, but that won't...
  8. vintageclub

    FS Parts: Time Soldiers PCB Working $70 shipped

    Working Time Soldiers PCB, working. $80 Shipped in the lower 48 states. Ships within 2 business days of receiving Paypal. Thanks for looking.
  9. vintageclub

    FS Parts: Bally Sente Wiring Harness

    For Sale: Main wiring harness for incoming power. Power cord end was cut off, but the rest is there. Hopefully someone can get some use out of it. $20 SHIPPED in the lower 48 states. Ships within 2 business days of receiving Paypal. Thanks for looking.
  10. vintageclub

    FS Parts: Bally Sente Sound Board, Power Board and plate $110 SHIPPED

    Bally Sente Sound Board, Power Board and plate $110 SHIPPED For Sale: Bally Sente power supply board and sound board, mounted to the plate. $110 shipped in the lower 48. Boards ship within 2 business of receiving Paypal. Thanks for looking.
  11. vintageclub

    FS Parts: **SOLD** Bally Sente MPU motherboard w/ Mini Golf $140 shipped

    **SOLD** Bally Sente MPU motherboard w/ Mini Golf $140 shipped **SOLD** Bally Sente MPU motherboard w/ Mini Golf $140 shipped in the lower 48 states. I accept Paypal via the gift option and ship within 2 business days or receiving payment. Thanks for looking.
  12. vintageclub

    FS Parts: SNK Rotary Joysticks and harness $100 shipped

    SNK Rotary Joysticks and harness with a few extras like the grommet/dust covers, some buttons and pal nuts. Came out of a Time Soldiers conversion. $100 shipped in the Lower 48. I accept payment via Paypal Gift option and ship within 2- business days of receiving payment. Thanks for looking.
  13. vintageclub

    PRICE CHECK: SNK Rotary Joysticks

    Any pricing ideas on SNK Rotary joysticks currently?
  14. vintageclub

    FS Parts: Price check: SNK Rotary Joysticks

    I'm curious of a value on SNK Rotary Joysticks. Any references? Any ideas?
  15. vintageclub

    FS Parts: Bally Sente Boards, cartridges and power supply

    Ive changed this to a FOR SALE ad rather than MMAO for obvious reasons. I have the MiniGolf set with harness, sound board, cartridge, motherboard on mounting plate, as well as the control panel with ball. I can sell individual parts, but the boards are $120 shipped, with cartridge is $140...
  16. vintageclub

    FS Parts: *SOLD*: Viper Phase 1 (one) PCB - fully working

    Viper Phase 1 PCB, fully working, very clean - $280 shipped in the lower 48 states. I'll post photos this evening when I can plug it in for demonstration. Thanks for looking. YouTube:. https://youtu.be/2K-OgyKd5rg
  17. vintageclub

    PANDORA'S Box 5 ALWAYS PRESSING DOWN problem

    Hi, I'm helping a friend who bought one of the standalone, tabletop 999 in 1 units off Ebay. Its a fun unit, but developed a problem with the P1 controls always being stuck down. I've pulled the wiring harness and the problem persists, so its on the board itself. Does anyone know of a...
  18. vintageclub

    FS Parts: Donkey Kong 3 PCB boardset with cage and filterboard

    Donkey Kong 3 PCB boardset with cage and filterboard **SOLD** I have a working DK3 boardset, in the cage with the filter board. Shoot me an offer if interested. Located in Rapid City, SD.
  19. vintageclub

    K7000 crackles and collapses with screen adjustment

    K7000 crackles and collapses with screen adjustment Okay, I'm working with a 19" K7000. The board has a new cap kit, filter cap, and flyback. The problem (before all the new parts) is that the image is jumping all over the place and blooming erratically. As you turn up the screen knob on the...
  20. vintageclub

    SEGA Hang-On..... boardset is completely dead.

    Any thoughts on where to start with a completely dead Sega Hang-On? This one used to get video, but very glitched out. Now, nothing, just raster lines on the screen, no video. The leds on the boards light up and the voltage is good with a brand new power supply. No music, sound effects...
Back
Top Bottom