Search results for query: *

  1. OneSixArcade

    Shark Jaws artwork needed

    Thanks for these photos! I'd put rubber stoppers on mine but I'd opted to only run the t-molding partway under the front edge; I can see now they ran it the full length. That's funny they never went to the trouble of producing a set of Horror Games tags for the back, just chopped the tops off...
  2. OneSixArcade

    Shark Jaws artwork needed

    Final push to the end and it's almost compete. Regarding t-moulding, I've seen it runs all the way down the back edges; does anyone with an original know if it also runs the full length of the bottom edges or just a short way under the bottom corners? Also, did these cabinets have a model/serial...
  3. OneSixArcade

    Shark Jaws artwork needed

    That's amazing! I'll be happy if mine comes out looking like that (sans the custom coin door ;) ) Just getting my AI control panel in place:
  4. OneSixArcade

    Shark Jaws artwork needed

    Beats me. I guess everything's up for question now! ;)
  5. OneSixArcade

    Shark Jaws artwork needed

    Not sure what took me so long but finally got round to starting to build this one.
  6. OneSixArcade

    Deathrace info needed

    Thanks, that's good to know.
  7. OneSixArcade

    Deathrace info needed

    I'm looking for some info on the Exidy Deathrace cabinet. Does anyone have a photo of the foot pedal assembly or a diagram to show how it was sprung? Also were these cabs sat on a frame or on casters? A photo of the underside of a cab would be great if anyone has one. Thanks for any help.
  8. OneSixArcade

    mini Arcade cabinets.

    Personally I love the cabinets themselves with their unique shapes and artwork; the games are kind of a separate thing for me. Mini cabs are great if you've ever wanted a home arcade setup but lack the space, or a very understanding partner.
  9. OneSixArcade

    The Pong Clone Thread

    Hi all, Would anyone here would be able to help me with some Pong clone related info? I've built two variations of the Pong cabinet and I'd like to now make its most similar clone. From the good couple of dozen clones I've seen, 'Paddle-Ball', 'Pong-Tron' and 'Pub-Pong' seem to have the...
  10. OneSixArcade

    PONG - Scale model

    Thanks to the folks here who were able to answer some of my Pong design questions I've managed to cobble together a 1/6 scale cabinet for my collection. Now this one's sorted I might have a go at re-skinning it for the clones - Paddle-ball, Pub-Pong, Pong-Tron, Winner, there's probably a bunch...
  11. OneSixArcade

    Pong's screen bezel

    Thanks for checking. It's difficult to know if reference photos are from original or repro cabs.
  12. OneSixArcade

    Pong's screen bezel

    I'm attempting to build a pong cab from measurements I've found on a few plans here. I've not found anything about blocking though; would anyone be able to tell me if the yellow screen bezel is tilted forwards at a 13 degree angle? Also, on the roof of an original cabinet do the laminate planks...
  13. OneSixArcade

    Space Firebird side art?

    Thank you! Oh yes! - Where possible I'll do any artwork as vector or a full scale bitmap.
  14. OneSixArcade

    Space Firebird side art?

    Haha, yes the obsessive pursuit of perfection if only for your own satisfaction. Thanks for checking your archives. I do have a fairly decent version of the bird from the operation manual.
  15. OneSixArcade

    Space Firebird side art?

    Yes, I'll probably do something along those lines; I can see a few firebirds in there also which would be guesswork what they look like. I do get far too hung up trying to achieve 100% accuracy.
  16. OneSixArcade

    Space Firebird side art?

    That's most probably the case, although I hold out hope for super rarities to suddenly pop up like that 'Monkey Magic' a few years back. Radarscope side art is on my want list also, which at least I've seen around on the enclosed cabs.
  17. OneSixArcade

    Space Firebird side art?

    This is probably a long shot but do any photos of the Space Firebird cabinet side art exist? I've just finished building a scale cabinet (left image) and the sides are looking a little bare. I'm planning on redrawing the artwork from what I can make out on the flyer but what's going on behind...
  18. OneSixArcade

    Shark Jaws artwork needed

    Thanks both for the heads up on the Strong Museum. Is the deal that you'd request what information they have on a machine and a researcher would see what was available and possibly get you a scan for a fee? The archives don't seem to be readily accessible online. Looks like an amazing place to...
  19. OneSixArcade

    Shark Jaws artwork needed

    That's fantastic! Thanks very much for posting these, I'll be able to get started on most of the artwork. If you happen to get a chance in the upcoming weeks it would be great to have a close up of the frogman from the bezel, the frogman from the side art, and a pic of the shark from the CPO...
  20. OneSixArcade

    Shark Jaws artwork needed

    I'm looking to scratch build a scale Shark Jaws cabinet and am collecting as much info as possible before getting started. I've found some plans from the original service manual and should be able to eyeball the rest from the few photos there are about. Does anyone have any clear, straight on...
Back
Top Bottom