Search results for query: *

  • Users: tristan
  • Content: Threads
  • Order by date
  1. tristan

    Found or No Longer Wanted WTB pedal assembly for Cruisin World Upright

    Looking for a pedal assembly for an upright Cruisin World. I have the pedal and the pot, but the rest of the assembly that holds it all in (hinge and spring and baseplate) is needed. Happy shows out of stock, so not sure if those will be back or not.
  2. tristan

    Anyone else here making their own carts?

    I started messing with console stuff and see there are ton of resources out there to make your own carts. I scrolled through several years of this forum and really didn't find much, which surprised me based on the general technical level of people in this forum. Are people here more just...
  3. tristan

    WTB - Atari / Dig Dug Service Panel

    Looking for the last part for my Dig Dug restore, though I would take an unmolested control panel still as well. Let me know if you have one. Also looking for a Taito Space Invaders ROM PCB or 3 board stack as well to finish my Trimline.
  4. tristan

    Frogger (Falcon) Pinout

    I have this PCB that was supposed to be a Frogger board, but appears to be a bootleg Frog based on the KPOK-OOA on the board. I was looking to make an adapter to test this out, but noticed the pinout was not the standard Konami pinout. The first 3 pins on both sides are all bound together and...
  5. tristan

    WTB - Galaga Cabinet Shell - DFW

    Looking for a shell cabinet or repro for my Galaga in the Dallas area. I have a complete cabinet that I salvaged from a front porch years ago, but it has just about had it after the last move to swap the monitor. Ive seen the repros in Houston but not Dallas.
  6. tristan

    SOLD - PARTS No longer available

    Not sure if there is any interest but I have two working monitors with tubes that have issues for sale in the DFW area $30 each: 1. Wells Gardner 4600: Works, but just cant get a good picture. Tube has heavy burn in. I also have a 13 inch NEC I can find no info on that likes to blow HOTs...
  7. tristan

    WTB - Dig Dug Control Panel

    Figured before I start trying to fix the swiss cheese control panel I have I would ask if anyone has one without any extra holes? I already have a new overlay, so art condition doesn't really matter.
  8. tristan

    FB - 3rd Party pacman arcade just needs some new bulbs

    Anyone know what these $79 bulbs are? https://www.facebook.com/marketplace/item/2101897786815378/
  9. tristan

    WTB: Missile Command or Punch Out! (Project)

    Looking for a Missile Command or Punch Out! cabinet in the DFW area. Looking for a cabinet in decent shape and anything else is a bonus. A Playchoice 10 double monitor cab might work as well for the Punch Out!. Not looking to pay full price for the Punch Out!, so project cabs are preferred...
  10. tristan

    Suggestions for G05-802

    I acquired this monitor from an auction in unknown condition. I plugged it in and got a horizontal line as if in vertical collapse. I found F600 blown on the deflection board, so I changed out the fuse, and proceeded to do a cap kit on the board, including the bottlecap transistors on the frame...
  11. tristan

    Asteroids Back Door

    I was building a back door for the Asteroids I recently got without one, and I was wondering if anyone has detail on how the air vent is set up. I have worked from some pictures and put the slot in the door, but I was unsure how the piece of wood on the inside is configured. Is it just routed...
  12. tristan

    FS Parts: PCBs for Sale

    Relief Pitcher PCB - Boots and game plays - Works - $40 Legendary Wings PCB (bootleg)- Again, not tested but came from an operator as working - $40 Neo Geo MV2F 2 slot PCB - Has a calendar error even after replacing the crystal, but seems to work with UniBIOS 4.0 installed. Have not been able to...
  13. tristan

    K7000A Crackling and Electric Sounds

    I was having issues with this K7000A turning on. It would turn on and seem to work fine after several attempts. I pulled it and did a partial recap, including the filter cap, but no change. I then went ahead and did several more as well as reflowed a few sus looking solder joints and the input...
  14. tristan

    2 Connections to Anode on 1 Monitor (K7000A)

    Not sure what I am seeing here, but it appears there are 2 flybacks attached on this monitor. The on on board and another white one that is held onto the chassis with some wire. I've had this thing for years and just never touched it since it worked, but lately has been giving me issues powering...
  15. tristan

    Looking for PCB Pin Headers

    I am trying to build an adapter so I don't have to hack up anything in a cab and am having trouble locating some PCB Pin headers. They appear to be the same size as the CGA plugs that come on the cheap JAMMA harnesses. Does anyone know what size or a name for these connectors (P and Q in the pics)?
  16. tristan

    Infinikey Install Gone Wrong

    I installed an infinikey on my Street Fighter Alpha 3 CPS2 board, but now the board has suicided on me. It was working with a 17 year old battery before I started (I waited way too long to change it). I've tried resoldering everything, but just a purple screen now. Any thoughts on what might...
  17. tristan

    WTB: 2 Daughtercard Brackets for Wells Gardner 4600

    I can get a couple 3D printed, but wondering if anyone has any laying around before I go that route. For the cost of a couple 3D printed and shipped, I am tempted to just buy the printer.
  18. tristan

    WG 4600 Geometry Issue - Fixed (Mostly)

    I have a couple outstanding issues on this 4600 I've been working on and wanted to see if anyone had any input. I picked up this 4600 from a trashed pac or ms pac cabinet. When I got it, it looked like a Fallout Pip Boy; all green output. After some adjusting, I got some blue as well, but no...
  19. tristan

    Monitor ID

    Does anyone recognize this chassis? It is a 13 or 14 inch monitor. I've been through several of the ID sites but haven't found one that matches. I'll be pulling the monitor this week (and should be able to get a better pic), but I ran a video all around it in the cab and didn't see any...
  20. tristan

    Millipede Issues

    I have a millipede game that had been working well (other than the green on the monitor I've been fighting with). I attempted to install a highscoresaves multipede kit and started just getting garbled characters and the system doesn't appear to boot. The player one and two buttons are solid...
Back
Top Bottom