Search results for query: *

  • Users: cleverlyj
  • Content: Threads
  • Order by date
  1. V1001 multi can cap need help with values/locations

    Replacing the huge multi can cap c101 in a v1001 monitor and I cut the cap conveniently where the symbols are to tell you what value to put to what terminal. Looking at it my options are Triangle Square D (half moon) Blank Per the cap it looks like 800 uf 125v is “D” Also looks like 200 uf...
  2. WTB - Satan's hollow joystick/insert

    I am looking for a satan's hollow joystick insert specifically, the one with the bird on it. If anyone has one pm me whatever your price is. I will also consider buying a whole joystick assembly if that's how it's for sale. Thanks, jim
  3. Joust to lcd - gbs 8200 board no signal

    Temporary conversion until I have some money to get another crt... anyways I get a no signal message from this. The board boots up and displays the logo so it’s working ok. I am using the 8 pin connector with this. Not sure if joust is an issue cause of positive sync. I have tried changing the...
  4. WTB: K4900 Neckboard

    Looking for one working K4900 neckboard. Preferably not cracked. pm me if you have one.
  5. Removing flyback to neck socket wire K4900

    What is the correct way to remove this? I have to do a neckboard swap and not wanting to break it. Can it be removed from the crt socket side or should I remove the side connected to the flyback control? Also does this connect via a butt solder of the wire to the control? I did a g07...
  6. K4900 won’t sync need help

    I have a Satan’s hollow with a K4900 in it. The monitor has been recapped and looks great. However the closest I can get the hsync to sync it still has like an inch off the screen. I’ve tried adjusting the controls which haven’t really made anything better. Ps ignore my other post I didn’t...
  7. Wg4900 picture centering/Horizontal off issue

    Hi. So have a Satan’s hollow with a k4900 in it. The sync was off when I first got it. The wires for the neg sync connector were swapped causing the issue. then screwing with it I got it as best as I could which was horizontally off center by a few inches when I got it causing the top of the...
  8. Help putting f14 on freeplay with dead displays

    Can someone help me with how to put an f14 on freeplay? The 3 and 4 displays are dead so I can see the top saying freeplay but the bottom where it shows the setting obviously isn’t working. It says to hit the credit button (I assume the switch on the coin mech) and hit auto up. But I can’t...
  9. Replacing side art that's recently installed...

    So on a ms pac I am restoring I fucked up the front art piece on it and got a couple wrinkles in the pink area. Being that the art has only been on for a few weeks can I simply pull off the fucked up art with a heat gun and then just put the new art on at that point or would I have to clean and...
  10. Pac monitor Dead//no power from harness

    So I have a pac project I'm working on. Pulled the g07 a week or so ago and did a full rebuild on it. So here's the issue Game played fine before I pulled the chassis. When I put the chassis back in and turn the game on I get no picture. Upon closer verification no power to monitor. Connector...
  11. g05-801 brightness issue

    so I have a g05-801 in my asteroids deluxe. the thing that i've noticed is that i can't get it overly bright. I can get it bright to where i can get a decent picture on the monitor, but cranking up the brightness and/or contrast all the way won't give me scanlines. My monitor has been...
  12. Wtb: 1 donkey kong blue nintendo button

    Need one to replace a trashed one on a dk. Pm me if you have one. Jim
  13. DONKEY KONG BOARD TRANSISTOR QUESTION 2sc1815/2n3904

    DONKEY KONG BOARD TRANSISTOR QUESTION 2sc1815/2n3904 Hey, so the q4 transistor is listed as a 2sc1815 transistor, which i don't have. i do have a 2n3904 which it seems to cross to from what i can find. does anyone know if that is ok to install in place of the 2sc1815? (installing at q4 to...
  14. FS Parts: For Sale - 7-11 slurpee video arcade cup set

    Well, I'm selling some stuff to help finance the basement renovation, so here is a set of 7-11 arcade slurpee cups for sale. I'd like to get $125 for the set. That includes free ups shipping to you from me. Here are a couple pictures. PM me if your interested:
  15. WTB - Asteroids Deluxe Braze Multi Game

    title says it all. I have a Asteroids Deluxe so I would need the Asteroids deluxe version. PM me if you have one.
  16. G05-801 picture shake/wave **UPDATED**

    so, this weekend i recapped the g05 in my asteroids deluxe. i also replaced all the pots with bob's g05 pot kit on the deflection board. Also, all headers and bad looking solder points have been reflowed. Since then, the monitor is fine, but it still exhibits the slight wavy / shake that it...
  17. G05-801 shakes

    So I have a g05-801 I got for my asteroids. When I first got it Friday the brightness and contrast had to be cranked up all the way to get a pic. However it was a smooth picture. I pulled the deflection board and reflowed all the header pins and replaced the contrast pot. Now I get a nice...
  18. 19v2000 problem. vector chatter no pic, spot killer off

    19v2000 problem. vector chatter no pic, spot killer off so, i have a 19v2000 in a asteroids deluxe that has no picture. it plays blind, and has vector chatter from the screen. it also has neck glow. the spot killer is off, does not light up except when you power on/off the machine. i have...
  19. gauntlet - best way to remove cpo without damaging original cpo underneath?

    gauntlet - best way to remove cpo without damaging original cpo underneath? so i'm in the middle of deconverting a gauntlet 2 to a gauntlet. i used a heat gun and was able to remove the gauntlet 2 cpo to find a pristine gauntlet cpo underneath. but, i'm having trouble removing the adhesive...
  20. Gauntlet 2 issues

    So, I picked up a gauntlet 2. I am occasionally getting lines through the sprites only but the rest of the screen looks ok. Also when the control panel harness flexes I lose up on the yellow controller as well as the blue player buttons. My first step is to reflow the p1-p4 connectors on the...
Back
Top Bottom