Search results for query: *

  1. Space Invaders sound issue

    Hijacking your thread as I have a different sound problem... I have a Midway Space Invaders with the latest Phil M test rom that has put up a real fight... At power up, a sound starts (much like the ufo but other sounds too) and this sound continues until any one of the E5 sounds is triggered...
  2. Solar Fox thread

    I have a Solar Fox cocktail cabinet that was missing its boards. It's got a good glass underlay, but the CPOs are virtually gone. Just saw an ad for a working board set for $350 so I am considering resurrecting it.... Is it worth it? I've actually never played it. Anyone have the...
  3. Long Island to NH??

    Thanks - I'll definitely keep him in mind for future moves but for a $50 cabinet I can't afford a professional move.
  4. Long Island to NH??

    Looking to get a Space Invaders cabinet from Long Island to New Hampshire. Anyone have some spare room? The cabinet is not worth much, so hoping the shipping doesn't cost a fortune. Thanks, Jeff
  5. Space Invaders - Midway - garbled screen

    A fellow member figured it out. It was the 157 at F7 itself. All of the outputs were bad. They looked like this on his scope. Thanks Mike!
  6. Space Invaders - Midway - garbled screen

    Logic probe is showing activity on the outputs of the 9316.. how do I know it's good?
  7. Space Invaders - Midway - garbled screen

    Yes, using the latest version but the saucer sound was drowning out the beeps. Had to turn the volume way up... 10th beep.. replaced 'B'.. then only got the 9th beep, so I replaced A. Then 2nd, replaced 2.. then 10th beep again. Yes, continuity on all pins and no shorts to adjacent...
  8. Space Invaders - Midway - garbled screen

    Midway L board Space Invaders.. Power verified at board.. reset signal operating properly. Clock section seems fine. Watchdog fires when H ROM is pulled but does not fire when test ROM is running (as expected). Also following the 8080 test procedure without luck. cap kit and RAM socketed...
  9. Midway Space Invaders II

    @PatW who was the klov'r that you got the color overlay from? I need one
  10. How to make your own colored monitor overlay for a B/W vector?

    Anyone have the Rosco color numbers for the space invaders cocktail gels?
  11. How to make your own colored monitor overlay for a B/W vector?

    That link was broken but I found the page in the web archives... https://web.archive.org/web/20231130080100/http://www.biltronix.com/battlezone.html
  12. FS Parts: Golden Tee Fore parts

    Parting out a Golden Tee Fore - green board. Tested NON working. Video seems to work but won't boot from hard drive. Repair person said there was corrosion on the Xylinx chip. - hard drive - believed to be working - ssd - Golden Tee Complete - power supply. Works as it should - wiring...
  13. SOLD - GAME Taito Space Invaders cocktail - Laconia NH - $600

    Own an original 3 board English CPO and instructions version of Taito Space Invaders cocktail cabinet. Fully working with rebuilt power supply, original crt, new ROMs (original ones come with but 1 has a broken leg and so it only starts in test mode. ). Original multi color overlay. Glass...
  14. Need help with Q11 transistor identification in a WG 19V1001

    Anyone ever nail this down? As Ken said, the NTE194 lists itself as a replacement for 86x0120-001 @GA61XX says it is a 2N5961 which the same as MPSA06 (which is also used at Q204 and Q212). If that is the case, why didn’t they just use a MPSA06?? What is it?
  15. TAITO Space Invaders Cocktail power supply Schemat

    I just picked up a Taito SI and the same tant cap is vaporized. Did you every figure this out?
  16. WTB: The two relays from WG 19V1002 Space Invaders Cocktail monitor

    Can someone with a Midway Space Invaders cocktail (with the WG v1002) read me the part number for the 5v dpdt relay (midway part #38A5473-000) from the relay cover itself? I know that the 6pdt relay 38A5474-000 is a AZ431-06-1WHUS (about $52)
  17. SOLD - GAME Asteroids Deluxe cocktail

    Original Asteroids Deluxe cocktail table Plays great! Caps replaced on power brick, AR and game board. New buttons and control panel overlays. Glass has scratches as you would expect from a 45 year old machine. Cabinet is solid, no water damage. I can help with delivery to central/southern...
  18. FS Parts: Solar Fox original manual and schematics

    Original manual in good shape for Midway Solar Fox. All multi-page foldouts appear to be there and are not ripped. Comes with original (yellowed and cracked due to age) plastic wrapper. It was obviously rolled in half for a long time as it is NOT flat. $25 OBO plus shipping
  19. WTB: The two relays from WG 19V1002 Space Invaders Cocktail monitor

    I need new relays too. I’m trying to understand the circuit…(yes, I have the schematic) I understand that the 5v signal to flip activates the dpdt relay which then activates the 6pdt relay. I understand the 4 poles which flip the yoke coils. But I don’t understand why the 5th pole...
Back
Top Bottom