Search results for query: *

  1. R3LL1K

    Craftymech tpg not outputting an image

    I'm actually having the same issue except I put a brand new Energizer Max in mine even though the one that was in it is still good. No image. Haven't tried dipswitch 5 yet. I do want to mention I had it hooked up to the monitor before turning the monitor on, turned the monitor on and when I went...
  2. R3LL1K

    SOLD - PARTS 25" K7000 monitor

    This is a Standard Res monitor. If this was closer I would have picked it up in a heartbeat. Great deal.
  3. R3LL1K

    K7000 chassis compatibility

    All of the K7000a chassis I've seen look the same, do you have pictures of the differences? Even the SI k7000 clone has the same layout, only differences are the remote board and neck board hookups other than that the layout is pretty much the same and the parts are interchangeable.
  4. R3LL1K

    How to test a flyback?

    You actually need the datasheet or documentation on the flyback you're testing which shows the pinout you can then see which pins correspond to the windings, you then test each winding, the tester will tell you if a winding is shorted, good or open. You can also watch this video to help you...
  5. R3LL1K

    Sold: Hakko FX-901 battery soldering iron

    i should probably sell mine. i use a Milwaukee M12 soldering iron now which blows the Hakko away,
  6. R3LL1K

    Who Can Setup A MAME Computer For Me?

    If you're not looking into running newer games with 3D graphics I would go with a Raspberry Pi Retropie setup if you go with a Pi 4 you can probably run the newer games as well. It's super easy to setup. What kind of games did you have in mind?
  7. R3LL1K

    SOLD - PARTS Midway Terminator 2 T2 Arcade Optic Guns (2)

    That looks pretty good, did you print those up as solid pieces?
  8. R3LL1K

    SOLD - PARTS Midway Terminator 2 T2 Arcade Optic Guns (2)

    I was thinking about buying one of these since the kick back plate is broken on one of mine then I finished reading your post. GLWTS
  9. R3LL1K

    ***** Potential SCAMMER Alert - UserID LoneStar

    I never pay F&F, I'll cover the fees myself a few bucks is worth my piece of mind. If I did pay F&F it would be to someone with plenty of reviews but even those can go south depending on that person's situation.
  10. R3LL1K

    K7000 intermittently displays.

    I would replace the capacitors but specifically C56 and C57, I've seen those cause the intermittent issues you're describing sometimes and since they appear to have the original factory glue they're long overdue to be replaced.
  11. R3LL1K

    Loud pop and smoke coming from Monitor Board

    I can't see a crack in your IC and that capacitor definitely blew, I don't know if you noticed this but diode D304 blew, that thing like really blew, I wouldn't be surprised if that one lead is shorting to the diode above it.
  12. Untitled

    Untitled

  13. R3LL1K

    What are you doing during the Apocalypse?

    Scott Pilgrim Vs the World is a great movie to watch. ;)
  14. R3LL1K

    Buying parts you didn't know you already have

    LOL, guilty. I've bought two replacement displays for my PinBot, same situation in that I found the first one I bought when I went to put away the 2nd one I got it. I still need to install one.
  15. R3LL1K

    Need some help with the v-hold on a Neotec 2701

    It's going to be a synch issue. Neotec chassis usually have vertical and horizontal synch inputs, I usually jumper these so that I only have to input synch to one. Otherwise remove synch from both pins and just put it in Horizontal.
  16. R3LL1K

    Neotec 2515C - Vertical Collapse

    Thanks, I ordered some replacements for IC301 about a week ago, replaced it with LA7850 since that's what is in the manual though both chassis I have, have LA7851's, it works and holds steady though the 200K vertical hold pot was also bad so a double whammy. It is running well.
  17. R3LL1K

    Neotec 2515C - Vertical Collapse

    Thanks for the suggestion R120 looks good at 4.9 ohm. I have some extra Vertica IC's but I get the same issue, it works then doesn't, cools down then works again then doesn't.
  18. R3LL1K

    Neotec 2515C - Vertical Collapse

    So I'm having an issue, when I first turn on the monitor I'm getting an image after a while it starts getting jittery and eventually the image collapses. If I adjust the vertical Size pot the image actually gets larger with the image only being compressed in the middle. I have done a capkit...
  19. R3LL1K

    Need help assessing damages for a claim.

    We do. I prefer not to be out the deductible and have to wait on subrogation. This will also appear in our list history and prefer not to hassle with that. It's always best to have the responsible party pay for damages in this case the landlord is liable due to failing to ensure the other...
Back
Top Bottom