Search results for query: *

  • Users: Samelak
  • Content: Threads
  • Order by date
  1. Samelak

    Sanyo 20EZ Help Needed

    I picked up a DKjr cab that had a poor attempt at being converted to Karate Champ. The previous owner showed a distorted image on screen but you can make out the game. Also there were no colors…just grey. I recapped the monitor and replace the B+. I also replaced the video input harness...
  2. Samelak

    Bosconian build…which cabinet can be used as a donor

    I picked up a Bosconian in a Ms Pac. It had all the art and proper control panel. I want to use that cabinet for a Gaplus build that I have a full kit for. I read that Galaxian shares the same as Bosconian but what about Pac-man? I have a good Pac-man cab I could use as a template to build a...
  3. Samelak

    Who Refurbs Gaplus?

    I’ve had this board for about 20 years with only being turned on few times for testing. It still boots but it now freezes when started. I’m thinking sockets are corroded and need replacing. Anyone out there specializes in Gaplus?
  4. Samelak

    Space Invaders Coin Door Paint Needed

    Does anyone have a good match for this paint color? Not worried about texture. Plan is to paint over existing paint.
  5. Samelak

    Galaga PSU Harness Connector Identification Needed

    I need to replace the lower harness connector for the lower header pins on the PSU. I have two positions burned up. No clue what type of connector.
  6. Samelak

    Midway 90420 Power Supply Adjustment Help Needed

    This has been pulled from my Galaga in preparation for restoration. I recapped the 90420 PS and pulled the headers to give them a good cleaning/resolder. I searched for adjustment instructions but cannot find any. Can someone give the test points for the voltages?
  7. Samelak

    Space Invaders Black & White Monitor Rebuild Help Needed

    I'm gearing up to recap the original Space Invaders monitor in my cabinet. I've done plenty of raster monitors but this will be my first B&W. Any tips or guides out there going forward? Can I wash the chassis safely like a raster chassis? I have a cap kit so I am ready to get started.
  8. Samelak

    Need 19” K7000 Width Coil

    Are these available? Mine had a seized ferrite core and cracked.
  9. Samelak

    Space Invaders Fix after 20 years in Storage

    I have both a SI and SI Deluxe. The SI acquired many years ago working but started getting blurring /bleeding monitor images. Never really figured it out back then (18 years) ago what was causing it. I had to move (military) and put it into long term storage to fight another day. Fast forward...
  10. Samelak

    K7000 (19”) with Diagonal Jail Bars

    Need some help with some diagonal bars scrolling through the picture. The bars are faint. Also the top edge (horizontally mounted) is quivering slightly. The chassis was capped plus a filter cap installed. B+ reads about 122. Adjusting the 50-60 hertz doesn’t fix the quivering…seems to be unrelated.
  11. Samelak

    G07 Width Help Needed

    I need to get a wider picture to fill out my screen. The chassis has been recapped and new width coil installed. B+ is at 120. With the width coil maxed out, I cannot get rid of a 3/4” black bar on one side. Doing a search, looks like I can change out a capacitor to get more screen size? Can...
  12. Samelak

    Who does Galaga repairs?

    Any recommendations for Galaga refurbishment repairs? Tried reaching out to Mrbill08, but no response. Mine was gone through about 20 years ago but is needed again.
  13. Samelak

    K7000 Diode D10 - Need Replacement

    Just recapped the chassis and not getting any picture. Flow chart says to pull D10 leg, but mine had that epoxy all over it so it came up in pieces. Does anyone know the replacement part number for D10? Also, still no picture with it remove so I will need to proceed onto the next step. Do I...
  14. Samelak

    WTB: POW Sideart

    I know this a long shot but I need side art for SNK’s POW. A set would be great but would even take a single side too.
  15. Samelak

    Advice Needed for Dynamo HS-1 Refinish (Paint Question)

    I need to freshen up an original POW in Dynamo cabinet that I had for about 20 years. I know this is not a desirable game, but I had too long to not want to redo it. Anyway, it looks like the original finish on these cabinets was paint from what I can tell. I tried sanding the lower half and it...
  16. Samelak

    WTB: Sky Shark Art Needed

    Looking for a CPO, Bezel and Side Art. Let me know what you have and how much you need.
  17. Samelak

    FS Parts: Neo Geo MVS Carts

    MVS Carts for sale. Every cart has been tested and verified before put up for sale. In a few cases, I had to reinsert the cart to display correctly, but the cart worked just fine (no issue whatsoever). Edges probably could use a cleaning on some of them. If you have doubts, PM me prior to...
  18. Samelak

    FS Parts: PCBs - Non-Jamma & Jamma

    All boards tested and working (unless there is a note). Paypal only (buyer covers fees or F&F). If you want extra insurance, let me know. Pictures available upon request. JAMMA Boards Progear CPSII (conversion, battery free) plus A-Board. $325 (shipped within the 48 US) Sengoku Ace II...
  19. Samelak

    WTB: Robotron or Joust Control Panel Hinge

    Found the control panel but still need a hinge. I think a hinge from Joust will work too. Message if have one to part with.
  20. Samelak

    FS Parts: Neo Geo LED Credit PCBs

    These were spares for cab I used to have. Cannot test, but they look fine. $35 shipped within CONUS,
Back
Top Bottom