Search results for query: *

  1. paul400

    K4915 cap

    thanks guys!
  2. paul400

    K4915 cap

    I’m trying to bring back a life to a 4915 for a customer. I just noticed this capacitor is missing. Does anybody know off hand the value?
  3. paul400

    Wells Gardner Monitor ID Help

    that is a k4900/k7000 hybrid , built to compete with the last generation of electrohome's to come out, the rare electrohome G19.
  4. paul400

    FS Parts: old 60-1 jamma pcb, non working $10 plus 1 ship, total 11

    I use them on my testing rigs for monitor repair, dirt cheap now.
  5. paul400

    WGk7000

    I rebuilt them, PM me
  6. paul400

    k5500 & k5515

    Another 5500. Just came in today, I feel like I’m in the twilight zone. I might get one or two every couple years but three in one week, wow!
  7. paul400

    k5500 & k5515

    Funny how things work sometimes, I almost never see the 5515 med rez in for repair or the 5500 std rez but I got them both in this week! I don't have a 5515 yoke but a 4915 is close enough to test with. I had this TV yoke for years that ohmed out on the vertical side at 44, but never used it...
  8. paul400

    5515 and 5500 yokes

    I am in need of a 5500 and 5515 yoke so I can service these models....
  9. paul400

    Why would somebody do this to a k4600 yoke?

    I have seen some very rare 4600 yokes where the winding for the horizontal are on the inside and vertical on the outside!
  10. paul400

    Galaga cab G07 monitor suddenly went out save for a red dot

    Most times a dot is caused by not plugging in the yoke , so make sure its in good.
  11. paul400

    K7300 All Red

    He won!
  12. paul400

    Chassis model?

    looks like it had an old Bob Roberts cap kit put on it at one time. Be aware these have very weak traces and can be easily pulled, especially since a cap kit was already done.
  13. paul400

    25” Monitor Help

    u2000 is what you have there.
  14. paul400

    Where’s the H Hold on this K7300 Tovis/Happ Vision Pro model MTG-1901CN

    wells k7300, they are basically the same chassis with minor differences.
  15. paul400

    Missing a middle strip of picture from this K4900...any ideas??

    you have a vertical problem. I have seen this many times when the chassis is paired with the incorrect yoke. There is a later and early version of chassis which need the correct yoke to operate correctly.
  16. paul400

    S501 Schematic neotec

    I need a manual or schematic or both to finish fixing this thing. after several caps were screened backwards and exploded I got it all working but wont lock in vertically. NEOTEC S501 Schematic
  17. paul400

    NeoTec S501 Schematic

    I am working on one , could use schematic!
  18. paul400

    K7000A 19" Left Side Vertical Lines Issue

    This is a common issue with the k7000A, I have seen it many times , it might be the old flyback causing it but since there is no replacements its hard to tell. You can try swapping neck boards if you have one and see if that helps at all.
Back
Top Bottom