Search results for query: *

  • Users: paul400
  • Content: Threads
  • Order by date
  1. paul400

    K4915 cap

    I’m trying to bring back a life to a 4915 for a customer. I just noticed this capacitor is missing. Does anybody know off hand the value?
  2. paul400

    k5500 & k5515

    Funny how things work sometimes, I almost never see the 5515 med rez in for repair or the 5500 std rez but I got them both in this week! I don't have a 5515 yoke but a 4915 is close enough to test with. I had this TV yoke for years that ohmed out on the vertical side at 44, but never used it...
  3. paul400

    5515 and 5500 yokes

    I am in need of a 5500 and 5515 yoke so I can service these models....
  4. paul400

    S501 Schematic neotec

    I need a manual or schematic or both to finish fixing this thing. after several caps were screened backwards and exploded I got it all working but wont lock in vertically. NEOTEC S501 Schematic
  5. paul400

    WTB ms8 yoke

    lost my ms8 yoke during my move to Tennessee, need one or two so I can continue to fix these.
  6. paul400

    la1464

    I need a supply source for the la1464 to continue to fix sanyo ez20 chassis, anyone have a known good supplier?
  7. paul400

    5515 med rez question

    I was sent a k5515 to repair but it was missing the neck board, as most know who work on the k4915 there is a wire that hooks up to the G1 spot on the neck board. Does the same apply to the 5515 or not? If so where is the wire located?
  8. paul400

    FS Parts: 4600 parts

    yokes 35 each Ver frame 60 hor frame 60 2 chassis clean orignal 75 each frames rails 40 each all plus shipping or send me a prepaid shipping slip.
  9. paul400

    FS Parts: k4900 chassis

    Up for sale a k4900 serviced by me and looking great. Nice stable picture with good colors, 160 plus shipping.
  10. paul400

    Flyback controls

    Hey, I am looking to source some of these controls for g07 and ez20 flybacks, I am seeing more and more or them fail through focus and voltage drift . I only have so many junk chassis I can pull from so looking for a solution.
  11. paul400

    wei ya 820 schematic parts list

    working one one of these and C323 exploded and need to find its value
  12. paul400

    FS Parts: k7203 chassis

    I have a k7203 chassis that came in on trade, I rebuilt it with a new flyback, caps and neckboard transistors, everything works great producing a very nice picture. $225 shipped
  13. paul400

    WTB k5500 and 5515 yokes

    need these for the few times I get these chassis in for repair
  14. paul400

    bestech btm19cm

    Can anyone tell me what the B+ should be set at for this monitor, I cant find much info on this one.
  15. paul400

    hantarex polo yoke

    hantarex polo yoke 25 inch
  16. paul400

    g07 rgb adapter?

    Never seen one of these before, any idea if its suppose to go to a specific game or wiring?
  17. paul400

    FS Parts: K7000 19 inch chassis

    Last run of the k7000 series marked P447D. Chassis is working perfectly. Parts replaced filter cap, caps with all nichicon/ panasonic, flyback, hot, voltage regulator, width cap, critical safety cab, Bridge rectifier diode’s, 2.7 ohm resistor, R91, D13, and whatever else it took to get this guy...
  18. paul400

    U5000 question

    I have a question about the U5000, there have been many revsions to these during their run. I have a revison (F) I am working on and like so many others I see it runs hot on the heat sink with the 3 transistors. I have seen other revisions that run cooler and I wanted to know if anyone knows...
  19. paul400

    MS8-26SU and ms9

    I have been asked several times to repair this type monitor and would like to set up the correct yoke and tube. does anyone have the right readings for this monitor's yoke and correct tube info.
  20. paul400

    FS Parts: 7 kortek chassis for sale

    7 of these all untested , just been on shelf. 55 shipped
Back
Top Bottom