Search results for query: *

  1. killerbooger

    BK 490B cable question

    I have this rejuvenator. I have some adapters that go for it that have that molex connector on the end of them. I think I need the CC12 adapter cable to connect those correct? Any idea where I could find one if so. I actually thought I had one but cant find it.
  2. killerbooger

    U2000 Chassis Question

    I dont know. I will need to repair it.
  3. killerbooger

    U2000 Chassis Question

    True. There were other picture issues as well, bottom quarter of the screen had lines and distortion.
  4. killerbooger

    U2000 Chassis Question

    Just put a p763 in there works like a charm. I'll get this other board recapped when I have time here. Here is the 717
  5. killerbooger

    U2000 Chassis Question

    The adjustment coil is snapped off the P717. I thought I would recap it at the same time if I were going to do it. I have about 50 boards I have already repaired and just thought if I could put a 538 in there I would. I have a ton of those. A little lazy I suppose but thought I would ask...
  6. killerbooger

    U2000 Chassis Question

    I have a P717 U2000 WG 35K2193. The chassis is done, needs to be repaired. I know that a K7400 will work in these but wasn't sure if that was a good idea and what all you had to do in order to make that swap, if anything. I can recap this U2000 but I always have a lot of problems with these...
  7. killerbooger

    K7500 P538 Intermittent blurry image

    I replaced the yoke worked fine
  8. killerbooger

    K7500 P538 Intermittent blurry image

    It was the tube. Needs a new yoke.
  9. killerbooger

    K7500 P538 Intermittent blurry image

    But I'll check these anyway.
  10. killerbooger

    K7500 P538 Intermittent blurry image

    Yeah, I dont think it is the chassis either given the fact that this is localized to this tube
  11. killerbooger

    K7500 P538 Intermittent blurry image

    The rejuvenation wasn't the cause of this. It was doing this before that process. That said, I used a 490B. No shorts, no issues found.
  12. killerbooger

    K7500 P538 Intermittent blurry image

    I have the tube and chassis noted above. I have put multiple chassis in it and every single one looks good then goes blurry. I took a chassis out of a good tube and it did the same thing. First time I have run into this, normally it is a cap thing on the chassis but this isnt that. Wondering...
  13. killerbooger

    Barry Shilmover XY Kit on a 6100?

    I think I have figured this out. The neckbeard that comes with it appears to fit an amplifone or a crt. The 6100 has a much larger plastic shroud around the pins. Can that just be removed or do I need to get a different size one to put on there? If I remove it I would be connecting right to...
  14. killerbooger

    Barry Shilmover XY Kit on a 6100?

    Found that video. Looks like that is the Fred version and not the Barry version. Not sure if that matters.
  15. killerbooger

    Barry Shilmover XY Kit on a 6100?

    It would require that the wiring that goes to the chassis be redone wouldn't it? The connectors on a stock 6100 are very different than what is on this kit. Are there instructions anywhere for this thing? I have been to the web site and can't find a thing.
  16. killerbooger

    Barry Shilmover XY Kit on a 6100?

    I had someone tell me this will fit on a 6100 is that true? I can't find any instruction on how to do this anywhere or any information on it. I had heard that it may go right on an Amplifone as well. I thought it was made to do a conversion only, but I am not an expert on these and really...
  17. killerbooger

    Chassis for a RCA a63ahc26x

    Trying to determine if there is a chassis that will work with this other than a neotec nt2501 Thanks!
  18. killerbooger

    Need adapter for B&K Rejuvenator for Philips A68QCU970X V4 Tube

    I haven't found a single thing. You are way ahead of me. If you make one, make two and I'll buy one. :).
  19. killerbooger

    Need adapter for B&K Rejuvenator for Philips A68QCU970X V4 Tube

    That one does appear to have the right pin out on in. Now where do I find one? :). That is the trick
  20. killerbooger

    Need adapter for B&K Rejuvenator for Philips A68QCU970X V4 Tube

    Here are pics of the pinout on the monitor.
Back
Top Bottom