Search results for query: *

  1. supertechnoboy

    WTB: Taito Back Door Lock Mechanism

    Hello, I'm looking for the lock mechanism that secures the back door on classic Taito cabs like Zookeeper. Highlighted in yellow in the image below. Thanks!
  2. supertechnoboy

    Frogger Cabinet Styles

    I'm aware of three Frogger cabinet styes: a cocktail, a normal upright, and a long-coin-door small-marquee upright. To be honest, I don't love any of them, and I'm wondering if there are other variants. Maybe Japan-only, or Euro, or something weird.
  3. supertechnoboy

    Z-Back CPO Replacement Advice, Please

    I'm going to replace the CPO on my SFII Z-back, and I'm not sure how to handle the cut corners. Normally, I would strip, prime, and paint the control panel, then apply the overlay. On this one, I'll need to trim the overlay to these cut corners: The black part is just paint, and I'm afraid...
  4. supertechnoboy

    FB - 3rd Party Varkon $15k

    Varkon on FB (not mine). $15,000. San Marcos, CA. [URL unfurl='true']https://www.facebook.com/share/p/1CUfj9R2P2/[/URL]
  5. supertechnoboy

    My K7000 has "Tails"

    I've got a K7901 that's exhibiting some strange behavior. It looks like when the guns go from white to dark during the scan, they're leaving a bright edge, and a "tail" then extends to the raster line above and below. The chassis has brand new caps and flyback. This is a tube swap (A48ABK05X ->...
  6. supertechnoboy

    FB - 3rd Party $100 Tempest - Galesburg, IL

    Not mine. Cheapest Tempest ever. https://www.facebook.com/share/1AyHZVWknZ/
  7. supertechnoboy

    Friday Night Gameplay Statistics 6/27/25

    We had a crowd of normal people visit the arcade Friday night, and by normal, I mean not like us. They played 364 total games, distributed as: Game Plays *Black Hole pin 139 *Pole Position II 28 *Donkey Kong 24 After Burner II Deluxe 22 *Centipede 21 Altered Beast 14 Joust 14...
  8. supertechnoboy

    Source for Width Coil Slug (Ferrite Core)

    Does anyone sell width coil slugs? I was troubleshooting some horizontal issues with a K4906 that was missing the slug/core from the width coil. I removed one from a working K4914 in another game, and during the installation I shattered it, even though I was using a plastic tool. Now I need two 😭
  9. supertechnoboy

    My Tournament Setup

    We're throwing a big party in a couple of weeks and I thought it would be fun to add a competition element. This is a "normal" crowd, some people will be into the games, some not at all. I wanted something SUPER simple, that would basically run itself, so I picked four of my twenty-five games...
  10. supertechnoboy

    SOLD - GAME Tempest - Wichita, KS - $1,650 or trade for Q*bert

    I wanted a Tempest so badly that I ended up with two--an Irish-built and an American. I was going to keep them both, but it doesn't really make sense, and I'd like to help fund the candy cab that's coming from Japan soon. This is an Irish cabinet with a U.S. asset tag. Original Irish sideart...
  11. supertechnoboy

    Anyone have a Centipede cabaret that's converted or gutted?

    I want to build an Arkanoid cabaret/mini, and I've kicked around a lot of different options. The Centipede cabaret cabinet is perfect, with it's 19" vertical monitor, but I don't want to destroy a good Centipede, you know? Maybe I wouldn't feel too bad about using one that's already been...
  12. supertechnoboy

    Can I shoot contact cleaner inside the knobs on the focus block?

    One of my good XM-1801 monitors sometimes loses focus, and if I just *touch* the focus knob, it snaps right back in. It's not drifting, just good or bad. On a different monitor, I would get a new flyback, but that's problematic with these guys. Can I just shoot some electrical contact cleaner in...
  13. supertechnoboy

    SOLD - PARTS Neck Protector and Braces for Sharp XM-1801N monitor frame $15

    Neck protector (aka neck bracket, neck shield) and two braces for a Sharp XM-1801 monitor used in Nintendo Red Tents. Parts as pictured, a little rusty. In case you're on the fence, I'll throw in six screws! $30 $15 shipped.
  14. supertechnoboy

    WTB: Horizontal Linearity Coil for WG K4914

    Hello! I'm looking for a horizontal linearity coil (L353) for a WG K4914 monitor. Part number is 9A2851-001. Marked as PREM 8548. Looks like this:
  15. supertechnoboy

    Any high score save options available for Street Fighter II?

    Has anyone ever developed high score save options for Street Fighter II? My boards are Champion Edition, running Hyper Fighting ROMs. I know that some CPS1 C-boards have batteries on them, but I think that's only for the security chip. I would love to do something with NVRAM/SRAM/FRAM or a HSS Kit.
  16. supertechnoboy

    Thinking about a Neo Geo Candy--Neo 25 vs. MVS 25 opinions?

    I'm considering adding a Neo Geo 4-slot candy cab to the collection. I kinda missed the SNK heyday in the arcade, so it's a whole new universe for me. I don't know much about candies, but I like the idea of adding four games in one small package, and I really like those little mini marquees...
  17. supertechnoboy

    WTB: Galaga Enhancement Pack (e-pack)

    Looking for Galaga Enhancement Pack. I'm happy to pay 50 bucks for rev 4.
  18. supertechnoboy

    K4900 Horizontal Linearity Problem

    I'm working on a later-model K4900 (5 pot) with horizontal linearity issues. The right side of the screen is compressed when compared to the left. When the center of an image is placed in the center of the screen, the right side will show a significant gap at the edge. I re-capped the chassis to...
  19. supertechnoboy

    SOLD - PARTS Mr. & Mrs. Pac-Man Rubber Ring Kit *FREE*

    It's somewhat of a mystery that I have a rubber ring kit for a "Mr. & Mrs. Pac-Man" pinball machine. I've never owned one, and I don't plan to own one in the future. I am but a conduit. If YOU have one and need rings, shoot me your address and I'll send you the kit.
  20. supertechnoboy

    SOLD - PARTS Sharp XM-1801N Monitor for Repair (Red Tent) $125

    I have a complete, non-working Sharp XM-1801N monitor for sale. I ended up with three complete monitors for my red tent, and I only need two. The yoke meters out OK, and the tube looks really good on a BK tester. Brand new HOT (old was shorted). B+ is at 27V, obviously not right, but I have no...
Back
Top Bottom