Search results for query: *

  1. WTB: Williams Blaster Marquee

    Looking for an original Williams Blaster marquee for a Duramold cabinet.
  2. G07 D503

    I don't see it often. Would a bad flyback cause D503 HF-1 to short and burn? Mini fuse was blown, which to me usually means bad flyback.
  3. Wells 4900 with relay

    Working on a 4900 chassis with vertical collapse. Virgin monitor that I had to cut the ground neck board ground wire and silicone on the neck. Never came across a 4900 with some kind of relay mounted on the chassis. The wires are tied to the signal wires and the yoke wires. It looks...
  4. SOLD - PARTS Lethal Enforcers pcb Working Sound

    Lethal Enforcers 1. Pulled from a cabinet I picked up. Sound module looks dirty and crusty, but is working right now. There was only one speaker in the cabinet so if there is a stereo option, I didn't test. $150 $125 shipped conus PayPal FF or please cover the fees
  5. 1943 Bootleg Japanese to English

    Does anyone know which rom or roms to change from Japanese bootleg to the English bootleg? Or can it be done? Pictures attached from the web for reference.
  6. WTB: Konami '88 Games PCB

    Looking for a working Konami '88 Games board.
  7. WTB: Atari Black & White Home Run PCB

    Looking for an Atari Home Run pcb or a Flyball pcb.
  8. Pixel Bash

    Does anyone have any experience with the memory card on the Pixel Bash board? Can the memory card be moved from one board to another? I ask because like most Namco games, it has a serial number displayed on the title screen. I want to try a known working memory card on a nonworking board...
  9. SOLVED. What is this part called? Bulb thing.

    What is this part called and where can I buy it. Looks like it has 360V and N below it. If someone could provide a link that would be great. Thanks.
  10. SOLD - PARTS Lethal Enforcers PCB (Price Drop)

    Lethal Enforcers 1 pcb. Tested working. As of today, the sound is working with the original sound module. Even though the sound is working, I would eventually replace the sound module thing because it looks a little crusty. $160 shipped CONUS Paypal F&F or $250 shipped G&S $125 shipped...
  11. Found or No Longer Wanted WTB: Sega Out Run Steering Wheel

    Looking for a Sega Out Run steering wheel. PM me if you got one.
  12. 17" K7000 Monitor

    Original Japanese SNK built cabinet. Original monitor in cab. Chassis: Toei TC-V818SU Tube: 17" Matsushita A43JAY02X/Y Yoke readings were close to a K7000. Neck socket is a fat neck CR23. Hacked in a 13"/19" K7000 chassis. Working with a beautiful picture. Confirmed. Hope this helps...
  13. K7000 Neckboard Neck Ring

    How important is this ring thingie on the neckboard neck socket? Before, when one or two pops out, I was able to pound it back in. But when the whole ring is out, it seems near impossible to align it and pound it back in at the same time. Can I just leave it out?
  14. K7000 Nut and Screw Size

    Anyone know the size of the screw and nut used on the K7000 HOT, VR, and vertical IC and where I can buy it?
  15. K7000 Neckboard Chassis Cut Wire???

    Been working on a bunch of k7000 chassis with no history. Been coming across some chassis with a cut wire from the neckboard plug that goes to the chassis. Did it come this way from the factory? What does that cut wire affect? I can't believe that someone would cut the wires from so many...
  16. Testing Atari power brick on the bench Big Blue

    Testing an Atari vector power brick on the table. I'm getting good DC and AC voltage at the 15 pin plug. Question. After turning off the power, I'm still getting the 15VDC at pins 1,2,3. The Big Blue will not discharge so I have to short it out to dissipate the stored energy. Is it correct...
  17. K7000 High B+ Shutdown R101 IC2

    Just finished working on a 25" K7000 that was going into shutdown. All the common components that leads to shutdown checked out good. The only things I found odd was that R73 was reading about 5K in circuit and R101 readings were jumping around on the meter until it finally settled around 4K...
  18. Another weird K7000 chassis help identify

    About to work on another K7000. Labeled P447 with a 19" style width coil. This chassis has 2 white resistors on the side AND the voltage regulator is a str30130. What has me confused, doesn't 19" use a str30123 vs 25" uses a str30130? So is this a 19" or 25" chassis?
  19. Swapping K7000 19" 25" Chassis

    Can a K7000 19" and 25" chassis and tube be swapped? Can I put a 19" chassis on a 25" tube or a 25" chassis on a 19" tube? I'm only using it for testing. Apologies if this has been asked.
  20. K7000(A) 19" or 25" chassis?

    Trying to piece back together a K7000A parts chassis, but I can't tell if it's a 19" or 25" chassis. Normally I can guess by looking at the width coil, but unfortunately it's missing. I've had both 19" and 25" and they both look similar. If I had to guess, I'm thinking this is a 25"...
Back
Top Bottom