Search results for query: *

  1. WTB working Gorf board and joystick

    I bought a cabaret Gorf a while back that was converted to a Gunsmoke. I'd like to restore it to its original glory!
  2. WTB working Gorf board set

    I recently picked up a Gorf cabaret. I need a full board set, cabaret control panel, and Gorf joystick. Any help would be greatly appreciated!!
  3. WTB arcade ticket redemption machine

    I'm looking for a ticket redemption machine (the kind that you feed tickets in and it prints out how many tickets you had). I'm located in Eastern NC. Thanks!
  4. FT - Game: Looking to swap up my games

    I have a few games I'm interested in swapping for others. I'm not afraid of projects. I have a working Aerosmith Revolution-X, a project DK cab that also has a DK Jr. board, and an Astro Fighter mini (with pedestal...no, NOT Arcade 1up!) project. Let me know what you have!
  5. FT - Game: '76 EM Freedom for trade

    Hey everyone! I'm considering trading my 1976 Freedom EM pinball for SS pins or arcades. Game works as it should with very minimal flaking of backglass! Playfield is worn, but it now has a playfield protector installed. Let me know what you have!
  6. Imperial ShoeShine machine

    I have recently purchased an Imperial Lenel Industries "the Complete Professional ShoeShine" machine. It works (doesn't shut off, but that's another story). I'm looking for a manual for it. All of my google research has been fruitless. Does ANYONE have ANY insight on this machine? I'm trying to...
  7. ISO parts for DK Cabinet

    I recently picked up a DK restoration project. It's mostly there, but missing some key parts. I'm looking for a coin door (preferably fully populated), I need the bottom monitor mounting rail and all mounting hardware, and marquee mounting brackets and hardware. If you have any of these that...
  8. three prong molex connector for monitor

    I realize that I should know this by now, and maybe my "forum search" skills are lacking, but I've been trying to find the answer to this for longer than I care to admit. I have a Baby Pac that I'm working on. The old monitor was hosed, so I decided to pull out a NOS WG 13" that I had been...
  9. ISO working bill validator

    I recently acquired a Sammy Extreme Hunting with an empty space for the bill validator. I'd like to put a working bill validator in there, but am open to a plate as well. Let me know what you got and what you want for it! Need shipped to NC.
  10. WTB fully working Centipede PCB

    I'm looking for a fully working Centipede PCB. Need shipped to NC.
  11. Centipede board throwing garbage

    I have a centipede that I recently rebuilt the power for. Voltages are good. I recapped the PCB and now it's throwing this up on the screen. I removed the POKEY to see if it made a difference (all it did was kill the sound...obviously). With the POKEY in it just keeps beeping loudly over and...
  12. Anyone have experience with a Sanwa PM-1755C monitor?

    I'm working on a Sanwa PM-1755C monitor that came out of a Time Crisis. The monitor just stopped working, with no neck glow. However, I've never worked on one of these before. I can't seem to find any info on them. I find some stuff about a 1745, but not this one. Anyone have any info?
  13. Replacing battery on capcom bowling

    I recently got a capcom bowling that has a dead battery. It's the kind that's like a CR2032, but it has the legs attached and is soldered to the board. What are my options for replacing it? I've looked for replacements where I can just replace the battery as needed, but there seems to be a lot...
  14. Help setting up TPG for K7000

    I've got a k7000 in my mercs cabinet (that was converted to Raiden 2). In the photo is how the wiring to make the game work is set up. However, I've tried so many different ways to hook up the TPG and I can't get it to work. I get the screen to come up, but it almost seems to be rolling so fast...
  15. Sync issue with capcom bowling

    I've got an old Frogger cabinet converted to a capcom bowling. I was convinced there was something wrong with the vertical hold because the screen kept rolling. I recapped the monitor, reflowed solder, and it kept happening. Hooked up the TPG and monitor is fine. I'm assuming it's a sync issue...
  16. Cabinet Identification

    I just bought a Capcom bowling, but am fairly certain it's not in an original cabinet. EVERYTHING (including all identification papers) has been painted over with this thick, almost industrial, speckled paint. I see nothing on the inside that says anything yet. The coin mechs remind me of...
  17. Capcom Big Blue A board repair/game PCB purchase

    I'm looking at a Big Blue that says it has an A board that "needs work" and has no game PCB included. My question: how difficult are they to work on? I've never worked on one, and am not sure how they are. Also, how difficult is it to find game PCBs for it? I did a brief search on ebay and only...
  18. Hentarex MTC900E identification

    I recently got a Pole Position with a Hentarex monitor in it. Thankfully, I always look at things before plugging it in and powering it on. As you see, one of the capacitors blew up sometime before I got it. Anyways, I've read that the Hentarex MTC900E has several variations. I just want to make...
  19. Shoutout for the help!

    I'd like to send a shoutout to @newsheriffintown and @Dewman for helping me get my Slick Shot operational! @newsheriffintown went out of his way to help me and I couldn't appreciate it more! As you can see, my kids are also very appreciative...they said it's their favorite game now. 😁 This is...
  20. Cabinet identification

    Anyone know what cabinet this was originally? Currently houses a Raiden 2.
Back
Top Bottom