Search results for query: *

  1. nerdygrrl

    FS Parts: Nintendo over/under door

    Yup, this is how the cab is cut. Two separate sections for two separate frames and door panels. Pay no attention to the crappy paint job.
  2. nerdygrrl

    WTB: Nintendo PC-10 and Red Tent Parts

    Thank you. My cabinet has the two piece top and bottom. Single top frame and door panel, single bottom frame and door panel. As Jano said that door was used in some of the single monitor games.
  3. nerdygrrl

    Who Here Fixes Ms Pacs

    Just to chime in on the fix it yourself chatter. I totally get it, why pay somebody for something you can do yourself. For a lot of us it comes down to time. As a small business owner, I have very little of it. Plus this is not my game. I love this community. I love all of the resources. I love...
  4. nerdygrrl

    FS Parts: Nintendo over/under door

    Sadly not the correct door. My PC10 is a two piece. Once single top. One single bottom door.
  5. nerdygrrl

    WTB: Nintendo PC-10 and Red Tent Parts

    I do, I still need both a top door and a bottom door, two piece.
  6. nerdygrrl

    Dr. Dude my Dream Machine

    You can sometimes take a hair dryer, not a heat gun as they get too hot and soften the decals up a bit and pull them out and straighten them a bit.
  7. nerdygrrl

    Who Here Fixes Ms Pacs

    I did that the last time I was out there over the summer. As @Mattspad stated this more than likely has some bad chips and sockets. I took a look at Mike's page and saw a few things that resembled what they are experiencing, but I do not have the time to work on this for them. I barely have...
  8. nerdygrrl

    WTB: Nintendo PC-10 and Red Tent Parts

    Take it back to the top!
  9. nerdygrrl

    Dark Planet In 3D

    Me too. I totally forgot about this.
  10. nerdygrrl

    Who Here Fixes Ms Pacs

    Thanks. I am pretty sure I replaced the fuse blocks before I put it on site for them, but will definitely be checking the when I go back down to install the new PCB and grab the old one. The screen is pink, there is some logic issue occasionally with it where it will stop going left, and...
  11. nerdygrrl

    Who Here Fixes Ms Pacs

    It's definitely a PCB issue, and while the cost of a working PCB is cheap, my time to drive there and back every time something comes up with it is not. So my hope was to get the OG bullet proofed as a backup. This is an on site game that runs 8 hours a day and brings the customers a lot of joy...
  12. nerdygrrl

    Who Here Fixes Ms Pacs

    Hi Y'all, my friend has a Ms Pac cabaret on location in her cafe. The customers love the heck out of it and it is sort of the star attraction there, It has been running 5-6 days a week pretty solid for the last seven years, but has started to act up. The screen is pink, there is some logic issue...
  13. nerdygrrl

    Pinball won at auction ends up “in the dumpster?”

    My friend and his mother were liquidating their grandfather/father's warehouse. He had been an op since the 40's. It was a massive place full of stuff. I had helped them previously with a very large sale. This last sale was the stuff they were holding onto and finally decided to sell including a...
  14. nerdygrrl

    Dr. Dude my Dream Machine

    I am out and thus on my phone right now, but I will link to some clear to hold that tomorrow and then yes, a mylar circle to address that drop area.
  15. nerdygrrl

    Dr. Dude my Dream Machine

    You'll be fine. Post some pics of the ramp damage if you want to and we can assist.
  16. nerdygrrl

    Sanyo 20EZ help - DKong

    Would you mind PM'ing me their info? I can't seem to find them in the member list.
  17. nerdygrrl

    Nintendo PC10 Power Supply Identification help and non EZV sound amp.

    What Jano said. Here are the specs on mine.
  18. nerdygrrl

    Dr. Dude my Dream Machine

    Nice work! If this is a diamond plate playfield you can skip the protective cover and just address the damage under the ramps. The existing clear coat will be enough protection in a home environment.
  19. nerdygrrl

    Neo Geo 4 Slot PSU Question

    I have some weird computer PS in mine and in my Z-Back that ops tossed in as replacements with some mods. I'll take pics when I am back at my office tomorrow.
  20. nerdygrrl

    Laminate on a Galaga - Thoughts?

    It will come down if you want it to be authentic or not. For me, I am terrible at painting. TERRIBLE so I go the laminate route. I have done several cabs this way. So much easier. You still have to make sure that everything is filled and sanded properly though. Any bumps, lumps, etc will show...
Back
Top Bottom