Search results for query: *

  • Users: gutz
  • Content: Threads
  • Order by date
  1. SOLD - PARTS Kung Fu Master Pcb

    Kung Fu Master pcb, you'll need Irem adapter. Bench tester for all inputs, video, and sound. Audio has moderate background feedback when no game sounds are played, game sounds are clear and play over top of the feedback - I can post a video if needed. The small PCB on top of the stack doesn't...
  2. FS Parts: TNK III PCB working with minor graphics issue

    Tested working on the bench for audio, video, coin, start, and joystick 4 way directions (I don't have a fully populated test harness or rotary sticks to test with). Issue: one background graphics layer is the wrong colors upon cold start (that's the gold/yellow in the pics) After warning up...
  3. SOLD - PARTS 0.9" Brass Tokens in Bulk from a Real Arcade

    These tokens come from an arcade that switched to card swipes (booo!). I will post pics tonight/tomorrow - They are all the same logo/design, there could be a few randoms mixed in but I'm guessing they will be 98.2284% identical. They haven't been cleaned at all, but I recommend that you run...
  4. SOLD - PARTS Several 25k7000 Working Chassis

    I picked these up from other members as untested/partially repaired. I finished up the job, made necessary repairs/trace repairs and tested them out on the bench for 4-5 hours. All controls work and good b+. SOLD Chassis #1: most of caps were replaced (looks like filter and 2 by flyback...
  5. SOLD - PARTS Working PCBs: Altered Beast,Dangar UFO Robo, Dyger, Kung Fu Master, Vigilante

    All prices shipped in the US (only). Paypal or Venmo accepted. Non jamma: SOLD Dangar UFO Robo, you will need a nichibutsu adapter. $225 SOLD Altered Beast, need a system 16 adapter $250 SOLD 225 SOLD Kung Fu Master - need Irem adapter (audio has moderate background feedback when no game...
  6. FS Parts: Greyhound Claw Machine PCBs

    These are untested but I'm guessing they worked as spares for the last greyhound crane I had (10+ years ago) but no way to verify now. $40 shipped for the lot in the US.
  7. FS Parts: San Francisco Rush the Rock pcb, pedals, wiring harness, seat, hood

    All parts are tested working, shipping to the US only. Rush the Rock pcb, no hard drive. initially had a 'no home blocks' booting error but after reseating connectors it is fully working for all inputs, lights, sounds, but I couldn't test the networking. The op did add solder to the edge...
  8. SOLD - PARTS San Francisco Rush the Rock Part out

    I will be parting out a rush cab (one piece cab that is broken). Send me pms with offers for whatever cabinet parts you might need. About 5 days before the 'free curb clean up' in my my town - get off your ass with parts requests!
  9. FS Game: Neo Geo MINI mvs-2 SD 57201

    This is my second (and last) mini. I sold the last one two years ago to a member here. Price is $2000 cash picked up in Watertown SD at a sibling's house I've had it since 2015 and at that time I recapped the 13k7000 monitor, replaced all sticks and buttons with new IL, and installed a 161...
  10. SOLD - PARTS SNK Psycho Soldier PCB Project

    This pcb is tested partially working with major graphic issues detailed below. It has one missing PAL chip that is certainly causing some of the issues and it's possible there could be other faults. All the standoff hardware is missing. I will post a video to show its current condition. The PCB...
  11. SOLD - PARTS Irem Lode Runner PCB

    Fully working/tested for sound, video, and player inputs and bench tested for 10 hours, including several power cycles. Hard to find previous sales and I will likely regret listening to posts from thegleek: I will start at $650 or reasonable offer shipped in the US (only).
  12. SOLD - PARTS Even More 13"/19" K7000 chassis

    Small neck (cr31) p447 chassis, work for 13" or 19" tubes. Tested working fine for 2-3 hours on the bench on a 13" tube. Good deflection, b+ power, adjustments, and colors. You can cap them at your discretion, most caps are original. I reflowed solder/repaired traces in the usual trouble areas...
  13. SOLD - PARTS 13" k7000 frames and Yoke

    13" triangle side frame, two sold, 1 more available $55 each shipped in the US 13" skinny frame, one available, I've never seen this one before not sure what it went in $55 shipped SOLD 13" yoke, three sold one more available, $45 each shipped in the US.
  14. SOLD - PARTS Several 13" or 19" k7000 working chassis

    Small neck (cr31) p447 chassis, work for 13" or 19" tubes. Tested working fine for 2-3 hours on the bench on a 13" tube. Good deflection, b+ power, adjustments, and colors. These five were all 'virgin' chassis - meaning they have had zero repairs/parts replaced before I was the first to remove...
  15. SOLD - PARTS Sharp XM 1801 Red Tent Monitor Project

    The bad: Non working! Shorted hot, likely a bad flyback too. Needs both fuses (I was testing with breakers). MIssing the neck cover and the flyback cover. A few minor/short scratches on the tube face (likely not noticeable installed in a cab, but I highlighted them in yellow in the pics. Keep in...
  16. SOLD - PARTS Williams System 3-7 Driver Board

    Fully bench tested and 100% working. Has a few patched transistor traces and one jumper wire to the flipper relay. Original connectors, no 'rebuild' work performed. It does have random black spots on the solder mask, it is NOT battery corrosion and does not come/flake off, it appears to me to be...
  17. SOLD - PARTS Leaf Buttons, Switches, Holders

    Sold as one lot $65 shipped in the US. Dirty/used but should clean up well. 31 long buttons 8 short buttons 13 skinny holders 17 fat holders I'll throw in approximately 20 holders that have been ground/modified for spare parts.
  18. SOLD - PARTS Steering Wheel Opto Interrupter (Atari?)

    NOS, but I'm not sure what these go to, the part number pictured didn't hit any Google results. For a 360 degree wheel. Not for off-road, but similar in size. These have a key on the mounting hole. $20 shipped in the US for the pair.
  19. FS Parts: So Many Wico Leaf Joysticks

    Breaking this into two lots to minimize headaches of onesies twosies. Prices are shipped in the US only. Lot #1: ten complete joysticks. One is 4" red, rest are 3.5". All parts are present and in restorable condition. No repro parts on any of these. These are in arcade -fresh condition and...
  20. SOLD - PARTS Atari Transformer Panel - Centipede,Millipede, battle zone, Road blasters

    Untested Transformer block/panel. From an Arabian - not sure if it fits others. $80 shipped in the US.
Back
Top Bottom