Search results for query: *

  1. FB - 3rd Party Atari Primal Rage restore candidate, Council Bluffs, IA

    $100 for an empty cab that was converted to a multi at some point. https://www.facebook.com/share/2AAcHvawE65YNXmT/?mibextid=kL3p88
  2. GDI Slither, Monitor Shelf Restore Advice?

    Hello, looking for advice on how to best replace the monitor shelf that is missing from my Slither cabinet. The way I look at it my options are: 1. Cut a piece of plywood/mdf to dimensions that could be bent into the grooves on either side, without breaking or compromising the strength of...
  3. Mr. Do - CPU stuck in WAIT, clock good, random sprites frozen on screen at boot

    I've got a Mr Do board given to me by a friend, boots to random sprites frozen on the screen. No response to any inputs. No background graphics, different sprites/positions every time it boots. After some diags with the logic probe, Clock signal to Z80 is good, but found /WAIT signal is being...
  4. Arkanoid - Graphics Issue, Vertical Lines

    Bought Arkanoid PCB with a tag that says "graphics issue with lines", it wasn't lying. Board boots up, plays, and audio works fine. Graphics are garbled but you can still make out everything on the screen. It does have vertical line artifacts through almost everything. Which appears to be a...
  5. Rockola Eyes PCB Repair Log - Playing Blind, All White Video

    Bought the board with uninstalled, mismatched eeproms, knowing that I would need to burn and install the correct images them after reception. Board was listed as untested so no idea what issues it might have. Erased roms with UV eraser then programmed with GQ 4X USB, not super confident in the...
  6. Atari Starship 1 - Fuse Id?

    Hello, it's come to my attention I very likely have the wrong fuse for F5 on the Starship 1 I've recently been trying to get working. The manual doesn't mention this group of 3 fuses in particular, but many other Atari games of this era have 8A FB fuses in this location. I was using a 2A SB...
  7. Thermal Camera Recommendation?

    Hi, looking for recommendations on a thermal camera, primary use will be for board repair, but will also likely use it for various tasks around the house. FLIR ONE Gen 3 is currently $229 on Amazon, which interfaces with a smart phone, but never having used one, I'm concerned the 80x60 sensor...
  8. Starship 1, Video working but noise covering screen [RESOLVED]

    Edit: Always start with power. Skip to the last post to see it working. 5V alone is not enough for this board to work. Leaving my notes here in case they might help anyone troubleshoot their own. Hello, I need some help identifying what is causing garbage on the screen for Starship 1 when...
  9. Taito Double Dragon cab, only certain 19" monitors without mods?

    I've got a Taito Double Dragon where I'm having problems getting monitors to fit in the original mounting frame without modifying the monitor or frame in some way. Two K4600's & a G07 do not fit and for all of them the cause seems to be the implosion bands preventing them from fitting in the...
  10. [SOLVED] K4600 issue after capkit, slanted picture

    K4600 that was in unknown condition after being stored for years, had vertical collapse when I tested it. Decided to do to capkit since I had one on hand. Afterwards, this is the best I could get it to look like while fiddling with the sync pots. This image is relatively static for how...
  11. Coin box and other misc parts IDs?

    Looking to ID the following: - 3 coin boxes - Pair of brackets - Parts to driving game? Thanks!
  12. Supertop 13" Monitor Mounting Options

    Finally got around to trying to swap the 13" monitor on one of the Supertops I bought a couple months back. Old monitor was necked before I bought it. The crack in the neck is pretty faint but it has the lightning inside when powering it on, so fairly certain it's toast. Old monitor was a...
  13. Slither PCB - CMOS Invalid

    Recently I was lucky enough to purchase an untested Slither boardset set. The 3.6V NiCad battery was previously removed and doesn't appear to have any acid damage on the video board. I'm using a Taito test harness and was able to get a picture on the screen but it hangs with this error message...
  14. Found or No Longer Wanted WTB 13" Tube or Monitor for Merit Supertop

    Bought a pair of Merit Supertops the other weekend, when going through them at least one is necked so I'm looking for either a replacement 13" tube or entire monitor. Edit: Replacement found on ebay thanks to @r5g_on_klov, thanks!
  15. Double Dragon PCB Repair Log - No audio

    Missing audio when purchased, good video & controls, coins up and plays. Running finger across audio amp makes crackling noises on speaker. Recapped all electrolytics on 1st board. Pulled all 3 Sound ROMs & verified good. Cleaned legs with dremel & reseated. Suspected bad CLK on sound CPU...
  16. FB - 3rd Party Bronze Age, Video Five II, has neck glow but non-working

    https://www.facebook.com/marketplace/item/760372178718520/
  17. Pinball near Rapid City, SD?

    Hi there, I'm in Rapid City, SD for a few more days, and looking for any pinball venues that aren't yet listed on the Pinside Map. Any locals with suggestions that aren't listed below? HEROES & VILLAINS Rapid City, SD— 3 games Added May 18th PRESS START Rapid City, SD— 11 games Added January...
  18. FB - 3rd Party Nichibutsu Cocktail 2in1 Rolling Crash & Moon Base - Lincoln, NE

    They listed 6 weeks ago for $300 with a poor listing title and no description as to whether it works, but I have too many projects of my own already. Someone out there might be interested in it. https://www.facebook.com/commerce/products/game-table/5515854348426010
  19. SOLD - PARTS Mr Do marquee - pulled from Taito cab

    Asking $20 + s/h, the little side brackets are not included & have been removed. PayPal F&F
  20. SOLD - PARTS Taito Qix CP with Mr Do overlay - Fully Populated - Untested

    Fully populated Taito Qix control panel with a Mr Do overlay on it. Can kinda make out the original CPO on the top edge. All buttons & switches populated but untested. Looks like all original wiring to me. This is an extra control panel I no longer need, was keeping it around just in case but...
Back
Top Bottom