Search results for query: *

  • Users: 1970
  • Content: Threads
  • Order by date
  1. 1970

    Burgertime Cocktail Table Power Supply Board

    Does anyone have a picture of the correct way this gets placed into the game?
  2. 1970

    Burgertime Cocktail Table

    What causes this to happen and is there a way to make it flush? It's on the hinge side.
  3. 1970

    Burger Time Cocktail Monitor wave issue

    I just had this game shipped from Florida to Wisconsin. Seller says picture was fine on the monitor when it was shipped. I plugged it in and the picture has a slight wave going through it. It has a modern switching power supply. I checked voltage and the +5 was at 5.66 so I turned it down to 5.0...
  4. 1970

    Wave going through my Burger Time Cocktail Table

    I just had this game shipped from Florida to Wisconsin. Seller says picture was fine on the monitor when it was shipped. I plugged it in and the picture has a slight wave going through it. It has a modern switching power supply. I checked voltage and the +5 was at 5.66 so I turned it down to...
  5. 1970

    Midway Cocktail table 3/8 Leg Leveler Mounting Bracket

    Need one or two of them. They screw in the corners of the cocktail table and the leg leveler screws get put in them to support the cabinet. No rusty ones please and thank you.
  6. 1970

    Burger Time Cocktail Glass

    Is there a place to order the replacement glass from online? Not sure if it's the exact size as Galaga, Pac-Man. I want it as original as possible 1/4 thick. Thank you
  7. 1970

    WTB: Burger Time Cocktail Table

    Must be in a dedicated cabinet with original power supply. Cabinet must be in good condition. PM please
  8. 1970

    WTB: Galaxian Dedicated Cocktail Table

    Must be mostly original with original power supply. Must be operational and the cabinet must be in good condition. Illinois Wisconsin Iowa or Minnesota area. Please PM
  9. 1970

    WTB: Original Midway Cocktail table glass clips

    I need at least 4 of them. Please look at the dimensions of the one I pictured. I would like an original one as Mikes Arcade and Arcadeshop are off sometimes and do not fit. If you have one available please PM me. Thank you
  10. 1970

    WTB: Set of 8 glass cocktail table clips for Galaga/Ms Pac Man

    Midway part number 0775-00104-00XF. PM me please.
  11. 1970

    WTB: Galaga Cocktail Table Coin box lid

    No rust please. Please see picture as an example.
  12. 1970

    WTB: Galaga coin door parts

    I want to get this to accept coins. I have attached pictures of the back side of my coin door. The 1st pic is my door. The second is my upright machine that is complete. I need the wiring to also that goes to the harness. Please pm me.
  13. 1970

    Found or No Longer Wanted WTB: Midway Coin Chute Assembly

    Please see pics. #26 on the galaga cocktail manual but these came in most early 80's Midway coin doors. I need two of them with screws. Please PM me. Tia
  14. 1970

    Found or No Longer Wanted WTB: 8 coin mech screws

    I recently purchased two Coin mechanisms but neither had the screws. Can I get them somewhere or does anyone have 8 if them for sale?
  15. 1970

    WTB: Galaga Cocktail Table coin box lid

    Must be in good shape. No rust please. PM me. See attached picture for reference.
  16. 1970

    Found or No Longer Wanted WTB: Midway Cocktail table on/off switch

    Can be used but working. I will even take the metal plate if needed. Mine is not working on my Galaga cocktail table. PM me please
  17. 1970

    Found or No Longer Wanted WTB: Galaga Cocktail Table Coin Box

    Must be rust free. PM me please
  18. 1970

    WTB: Galaga Cocktail Table Coin box

    Must be in good shape and no rust. PM please.
  19. 1970

    WTB: Midway Galaga coin door

    Needs to be in good condition and fully intact. Coin mechanisms etc. Please PM me. Thx
  20. 1970

    WTB: Coin Mech Midway Galaga

    Want to purchase two Coin Mech .25 130 coin mechanisms. I need it for a galaga cabinet. Please PM me. Thank you
Back
Top Bottom