Search results for query: *

  1. TheNickDuong

    Z-Back cab owners read

    As far as I know, on these Angled Cabs, you aren't supposed to be able remove the top easily. However, the spacing provided is set up so you can push up on the marquee so it clears the bottom and then you can remove it. Same process in reverse to put a marquee in. I always just took the bottom off.
  2. TheNickDuong

    Ghouls n'Ghosts bootleg rolling screen.

    Oh it's a super gun... Hmm. I was going to say some games need adjustments to sync vs others on occasion. But since you are outputting to Consumer TVs, I don't know.
  3. TheNickDuong

    Ghouls n'Ghosts bootleg rolling screen.

    Could it be the sync on your monitor?
  4. TheNickDuong

    Pole Position power switch

    I haven't taken a closer look to see how the switch is wired on mine. But something like this would probably be fine if it's just switching neutral off and on...
  5. TheNickDuong

    Looking for woodgrain vinyl that will match a Miday cabaret and won't break tha bank.

    Thank you! I believe @DLP is who referred me to this vinyl for when he was doing a Centuri restore. I've used this brand numerous times for CPOs. On the cabinet above, I used their black vinyl for the interior and front panel.
  6. TheNickDuong

    Looking for woodgrain vinyl that will match a Miday cabaret and won't break tha bank.

    I used what's linked below on a scratch built 60-1 I did for someone last year. I was very pleased with how it turned out https://www.amazon.com/dp/B00L9J60F0?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_10&th=1
  7. TheNickDuong

    Pole Position gas pedal cable.

    I'm glad I found this thread on Sunday. I replaced mine with the 9" one from the amazon listing below. Skipping one loop around the cap screw. Took a bit of trial and error, but the calibration eventually got where it needed to be...
  8. TheNickDuong

    PacMan Power Supply Bypass!

    From my experience with my Pacman, I would recommend troubleshooting and using the stock setup. Fuse block, edge connector, and caps tend to work out. I bypassed the power section on mine and it only ended up causing problems with my PCB over time. After I repaired my board, I went through and...
  9. TheNickDuong

    Pac-man plug: is it original? how to repair?

    There's a bunch to choose from at Home Depot. They always have a decent stock locally. https://www.homedepot.com/p/Leviton-15-Amp-125-Volt-3-Wire-Grounding-Plug-Orange-R03-3W101-0OR/301305041?source=shoppingads&locale=en-US&gStoreCode=663&gQT=1
  10. TheNickDuong

    trying to revert a Rainbow "wave-4096" SF2 back to CE and HF

    Totally forgot about hobby roms. Yeah that’s a good shout. When I was looking, I just googled that PAL and luckily Andy’s arcade had 1 for sale. It was the only 1. 🤣
  11. TheNickDuong

    trying to revert a Rainbow "wave-4096" SF2 back to CE and HF

    Great! Glad you were able to sort it out. If I am not mistaken, you should be able to program a GAL to perform the same function. I'm not well versed in programing eproms etc
  12. TheNickDuong

    trying to revert a Rainbow "wave-4096" SF2 back to CE and HF

    Not sure. It was one of the first things I ever did with arcade hardware. I got the board as a rainbow, picked up the 3 HF EPROMs on eBay, and threw them on there. It was just a black screen and faint Vega yodeling. I replaced the pal and it came right up. Once it worked I never looked at it again 😅
  13. TheNickDuong

    trying to revert a Rainbow "wave-4096" SF2 back to CE and HF

    When I converted mine back, I had to change out one of the PALs. BPRG1 at 11D is what I needed to get. 12D being IOB1 remained the same for Rainbow, HF, and CE.
  14. TheNickDuong

    Need Neo Geo help

    I've never had those 2 games. Sorry I can't be much help here...... Perhaps it's a setting in the cards test menu?
  15. TheNickDuong

    Need Neo Geo help

    The carts are region-less and the region is determined by the bios on the 4-slot board. So that should not matter. Are you able to use the controls without issue with any other carts? You can test all the inputs in the service menu to make sure everything is functioning correctly.
  16. TheNickDuong

    It’s probably just a fuse…

    A 2 or 3 amp fast blow should be suffecient
  17. TheNickDuong

    Free pac Man arcade 1up

    This strategy paid for some of my current collection! I used the included LCD most of the times, but sometimes a swap was nessesary.
  18. TheNickDuong

    Help: MVS 4-slot arcade fuse cap is lose

    Actually, This looks like a complete replacement that would fit in the space provided.
  19. TheNickDuong

    Help: MVS 4-slot arcade fuse cap is lose

    No exactly what you're looking for because it isn't going to be "stock", But you can pick this up from amazon and replace the fuse holder altogether. https://www.amazon.com/gp/product/B00H3CVSXQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
  20. TheNickDuong

    IGS PGM Erratic Error

    I’m not versed enough to recommend you sending it to me! To clarify, I was suggesting a YouTuber who has showcased repaired in the past that may be able to help. All I’ve done is clean mine to get it to work.
Back
Top Bottom