Search results for query: *

  • Users: mecha
  • Order by date
  1. mecha

    Tube swapping a 25" wells gardener chassis/monitor combo.

    for posterity, the horizontal pair should be relatively low ohms, somewhere between 1-2 ohm, and vertical pair I think is between 7-8 ohm. also splicing yoke wires is silly. you can buy the correct pins and plugs from APAR, permitting you know how to crimp. don't be this person:
  2. mecha

    Pac-Man Composite Negative Sync Issue - K4900

    Pac-Man uses negative composite sync. traditionally, since much of them came with G07s, the 3 pin sync plug will have a wire bridge between pin 9 negative vertical sync and pin 10 negative horizontal sync. as you can see, someone cut out the pin 9 bridge wire. the instructions you're referring...
  3. mecha

    Who Here Fixes Ms Pacs

    I'm in the Pinball Repair group on Facebook. as probably everyone should know, pinball is a rich man's game, and at the beginning of the year when I had one of those Rottendog MPU327-04's crap out in Firepower at work I got to thinking about this. one of those costs $500 new, and in the event it...
  4. mecha

    WG K5515 intermittent HV Shutdown

    I have seen the solder to the legs of the voltage regulator socket crack. I would do both that and the HOT one. also overlooked is the B+ jumpers along the edge. probably this weekend I'll get around to my new tutorial video.
  5. mecha

    Who Here Fixes Ms Pacs

    you spelled Scuba King wrong, but... you're also right
  6. mecha

    Who Here Fixes Ms Pacs

    what is it doing? or not doing?
  7. mecha

    Solved (I think) - Sinistar Freezes During Title Screen and Gameplay

    you're be amazed at the things you find in barn stored games. like almost every one I worked on in Texas had some kind of chemicals and contaminants and overall shit and rust and whatever in them.
  8. mecha

    Solved (I think) - Sinistar Freezes During Title Screen and Gameplay

    I've seen that before now that I remember. there was a period in 2020-2021 that a lot of my pictures weren't saved though, so I might not have evidence.
  9. mecha

    Solved (I think) - Sinistar Freezes During Title Screen and Gameplay

    Gorgar ftw I need to reinstate "mecha was here" on Joust and Sinistar
  10. mecha

    Solved (I think) - Sinistar Freezes During Title Screen and Gameplay

    is there any battery leak anywhere? it kind of wrecks things in that area.
  11. mecha

    Solved (I think) - Sinistar Freezes During Title Screen and Gameplay

    don't bother with 74153s. that's going to do with address bus, which the game runs, so it's not there. your ram error 21 or 22 could suggest something may be amiss with 3H 74373 (assuming this is an original Rev. D MPU; otherwise it will be a 74374 part) logic probing inside the game will be...
  12. mecha

    MK II keeps wiping Game audits and top scores

    did you replace the battery?
  13. mecha

    PP2 CPU board (Atari) boot issue

    they're the exact same boards so this information applies. I was also going to suggest this reading KPWs post. lol
  14. mecha

    Solved (I think) - Sinistar Freezes During Title Screen and Gameplay

    work Sinistar was pretty sick. worth noting it and Joust were the only games not running JROK. when I came back to work here they were running on Arcadeshop switching power supplies and were a nuisance almost every day resetting CMOS. so I fixed the linear power supplies. also, don't reflow...
  15. mecha

    PP2 CPU board (Atari) boot issue

    FPGA catbox will work well with these because the Z80 section needs to function in order for the Z8002's to "wake up". the 3E and 3F rams are on the video board that I remember. you'll be highly confused looking on CPU board and finding those are one of the sub CPU rom sections like I was. :)...
  16. mecha

    Solved (I think) - Sinistar Freezes During Title Screen and Gameplay

    yes 5114, 5514, 6514 are all compatible. for giggles you could even use a 2114, but I wouldn't use that with batteries the high score corruption is one of the early signs the CMOS is probably at fault. another sign is if it always boots to factory settings restored even after confirming battery...
  17. mecha

    Solved (I think) - Sinistar Freezes During Title Screen and Gameplay

    Sinistar in my experience is prone to weird CMOS corruption that causes the game to freeze or reset. I would go into adjustments and change the following items to YES and press Advance. see if scrubbing everything fixes the reset issue. given you yoinked the batteries already you probably...
  18. mecha

    NBA Jam Graphics ROMs Failed Test

    GQ4x4 isn't the best programmer, but for the money it's a great value. the games you intend on using it with should have 100% compatibility. when you get into the older, smaller roms like 2716 or 2732, you need a 9V transformer (external power) and depending on manufacturer things can get a...
  19. mecha

    Burgertime Cocktail Table Power Supply Board

    given that I didn't even know these people existed before today, probably not me. I don't know EDIT: @sfspanky I do have 18 gauge wire in different colors, but not those colors. they're in Madison, I can ping them. but I need a rough estimate on how long the wires are.
  20. mecha

    Burgertime Cocktail Table Power Supply Board

    I've never heard of Wire-Bot, you just tell them the wire lengths, gauges, and colors and they produce it?
Back
Top Bottom