Search results for query: *

  1. treborlicec

    ZooQ in vertical mode

    Anyone here run there ZooQ in vertical mode? I'm particularly interested how you feel about playing Zookeeper in vertical. I have this cabinet and leaving in the vertical would give me the most versatility. Thoughts and opinions? Thanks.
  2. treborlicec

    G07 weirdness

    I've got this same issue on 2 tubes. I thought for sure those black bars were a tube issue, but they are identical on a different tube. Any ideas? Thanks in advance. Chassis has a new flyback, caps and hot.
  3. treborlicec

    K7000 flyback question

    Hey all. Been forever since I've done a monitor. Thing was working. Just doing caps and flyback as the screen was exhibiting issues indicative of a rebuild. Anyway as I'm checking my work I'm getting continuity between all the points highlighted. Meaning the red is all connected etc. Is...
  4. treborlicec

    Brand new ZooQ having issues

    Getting this static screen when applying power in my HS5. Getting 5.1v at the end connector. Is that too high for a ZooQ? Also to be clear, I bought this from the original purchaser who sold it without ever using it. He did test it for me and it was working.
  5. treborlicec

    DK Jr PCB with graphical glitch

    Hey all. This is what's going on. I've tested the roms with my programmer and they check out. I've also installed a Braze HSS kit simply for the diagnostics and it shows all RAM and roms ok. Any tips where to start would be great. Thanks.
  6. treborlicec

    WTB a nice original Pac-Man Plus marquee

    As stated, looking fora nice original Pac-Man Plus marquee. Thanks
  7. treborlicec

    Any way to remove these stickers safely?

    I know it's most likely impossible to remove these without damage, but on the off chance someone has had success in a similar issue...
  8. treborlicec

    FS Parts: Shinobi kit

    Shinobi kit. Includes PCB, bezel, marquee and manual. This worked when I bought it, but I've sold almost all arcade stuff in favor of pinball. 400 for the whole kit plus shipping.
  9. treborlicec

    Found or No Longer Wanted WTB DK Jr Braze HSS kit

    Hi all. I'm wanting to see if I can score a cheap Braze DK Jr HSS kit. Anyone have one laying around after upgrading to a more elaborate kit? Thanks
  10. treborlicec

    Looking for opinions on a good multi board that includes Tapper

    My lady would like Tapper in the gameroom. I told her you would have to pick an expensive game like that LOL. Any horizontal jamma boards that have Tapper any good? Recommendation? This would be going into a Dynamo HS5 Jamma cab.
  11. treborlicec

    SOLD - PARTS Mortal Kombat 2 MKII

    Hey all. Looking to sell a Mortal Kombat 2 PCB set. All cables and kick harness included. Working 100%. Looking for $450 shipped in the US48. Thanks
  12. treborlicec

    NOS Capcom move decals as pictured

    Looking for these specific Capcom move decals in NOS form.
  13. treborlicec

    Pandora's Box 4 video issues in Dynamo HS5

    Howdy KLOV friends. I've been trying to put a Pandora's Box multi in a HS5, for a friend. I tried some stuff and it never works right. I get scrambled glitchy video. I can get pics later. I read a while ago about a ground pin being an issue and I removed it from the harness but still had...
  14. treborlicec

    SOLD - PARTS NOS Midway Jamma harness

    NOS Midway Jamma harness. Has kick harness included, as well. Won't be needing this one any longer since I am pinball focused in my collection. Looking to get $100 including shipping to the US 48. Thanks for looking.
  15. treborlicec

    FS Parts: Zookeeper pcb set, mostly working - graphics glitch

    Sold my Zookeeper game and have this spare "not quite fully working" set of boards. I don't have the game any longer, so I can't show screenshots, but there is a graphical glitch, as it was explained by the repair person I had look at them. I will post pics of the set later. I'm at work and...
  16. treborlicec

    DK Jr cocktail coin box wanted

    Same coin box used on red tents and Popeye cocktail cabs. Prefer original if I can find a presentable one. Thanks.
  17. treborlicec

    Donkey Kong TKG3 repair

    I wanted to start this thread to keep a log of what is going on with this board set. I haven't ever repaired a DK set, so I want to give it the old college try. Started out having to make the 3 cables that connect the 4 board stack to each other. Got a dupont connector kit and knocked those...
  18. treborlicec

    Donkey Kong cocktail fan: Is it needed? Spoiler alert: It is

    Wondering if they fan in the bottom of the cocktail cab is needed for this game? I've been in research mode since getting this project. I see a bunch of posts and vids with TKG3 boards where there is corrosion and general filth in the area of the pcbs, where the fan blows. I was thinking of...
  19. treborlicec

    Need DK Cocktail hinges and button bracket

    Picked up a DK Cocktail and the P1 metal overlay has been mangled and a regular leaf button was put where the jump button goes. I need the metal overlay and the whole button assembly including bracket. Seems I could also use the hinges. The pieces that attach to the top are missing. I know I...
  20. treborlicec

    DK 4 board stack cable/harness help needed

    I am acquiring a DK 4 board stack TKG3 set soon. This set has none of the small harness pieces that connect the 4 boards. Would anyone with a set of these mind taking pics of them, removed and stretched out, so I can copy them? Also, notes on where they connect to/from would be awesome...
Back
Top Bottom