Recent content by yose

I measured the voltages from the power supply and came up with the following... The power supply connector has 8 pins. Pin 1 (red) +DC goes to circuit board Pin 2 (Black) DC common goes to circuit board Pin 3 (White/Black) DC common goes to circuit board Pin 4 (White/Black/Purple) +DC goes to...

Thank you for the advice and offer!! I will measure the voltages from the power supply (I am not an electronics person, but will do my best) and post back. I had measured 5V through the circuit board, but will recheck the voltages out of the power supply.

Hi, The machine I have has a bad PCB Board. When I power on the machine, I only hear a low sounding click of the coin counter and nothing else happens...no LED display, no lights (other than the 120V Fluorescent light). Dropping a coin in the coin mechanism does not cause the counter to...