Recent content by wolfievtec

Thanks for this info! I did finally get the repaired board back from Skip and everything is working now.

**update** I am sending the mega jamma board to Skip for repair this week. Not sure how long it will take but I’ll post once I get it back.

Not yet, still waiting to hear back from Skip.

Ok, yeah it's Skip Hansen. Thanks for the info!

I have been put in contact with Team Play and waiting to hear back from the guy who works on the "old games". I will see what he says and report back.

Yeah it is a Dallas iButton. Not sure what model but I can find out. Thanks for the info, like you said, it doesn't look easy or fun but not impossible. I guess if that internal battery is now completely dead , then maybe it finally lost the important license info?? ...

I have a ST Voyager that started showing not authorized every once in awhile. It now won't go away. I have tried to "re-seat" the security chip on the MEGA-jamma board dozens of times. At this point it won't go away. I have also "re-seated" the jamma board. What else can I check? Do those DALLAS...

I have an original Taito Elevator action that keeps blowing the circled fuse. I've been looking for the adapter to use a new switching supply but no one seems to have one in stock. Does anyone have one or know a place I can send this for repair? Thanks!

I am trying to convert a Midway Rampage to LCD. I am getting a double image when using a typical CGA to VGA converter board.... So I have purchased the "video timer chip" from Arcade shop that replaces the chip in 6H. I am still getting a double image.... any ideas? Thanks!

I'm going to reach out to Arcade Parts and Repair and see if they have any, thanks!

Hi, I'm looking to make my own custom wire harness for a Super Bikes 2. Does anyone know where I could buy the board connector ends or are they something only Raw Thrills makes? (See pics) Thanks!

I always install a SSD Hard Drive in my Buck Hunters then re-install the software with the recovery discs.

I have a Super Punch Out. The manually shows the lower monitor plugs into the one outlet on the block, the florescent lamp in the other and the upper monitor in the black cord that hangs out. When I do that, I get no power to the lower monitor. If I plug both monitors into the block they both...

I’m losing my mind! lol. So, the bottom monitor only turns on if both monitors are plugged into the power brick. It makes no sense. If I plug everything in like you said and the book says, the bottom monitor won’t turn on. So weird…. all outlets show 105V. I’m wondering what triggers the bottom...

So, I now have this wired correctly as per the manual. I have 105v coming out of both outlets on the block. The bottom monitor now doesn’t turn on, top is fine. Any ideas?