treborlicec's latest activity

  • treborlicec
    treborlicec replied to the thread FS Parts: Shinobi kit.
    Had a request for better PCB pics.
    • 20250922_200201.jpg
    • 20250922_200205.jpg
    • 20250922_200208.jpg
    • 20250922_200211.jpg
    • 20250922_200158.jpg
    • 20250922_200152.jpg
  • treborlicec
    treborlicec replied to the thread FS Parts: Shinobi kit.
    Bump time. Let's make a deal.
  • treborlicec
    treborlicec replied to the thread G07 weirdness.
    This thing keeps losing the adjustment. The curl comes back when the monitor is off for a while. Doors that indicate a bad pot? I...
  • treborlicec
    treborlicec reacted to jimbodeanny's post in the thread G07 weirdness with Like Like.
    You can also rotate the yoke a little too. It'll obviously affect the orientation of the entire image, including the top, but you may...
  • treborlicec
    treborlicec replied to the thread G07 weirdness.
    I think I can live with this. Put the other width cap back in which is a 184. Fills the screen with only a little crookedness on the...
    • 20250911_092828.jpg
    • 20250911_092841.jpg
  • treborlicec
    treborlicec replied to the thread G07 weirdness.
    It's curling at the bottom left corner. I wonder if changing c517 and 518 to some of the other suggested values would help and also if...
  • treborlicec
    treborlicec replied to the thread G07 weirdness.
    I had both of those sizes on hand. I placed the 470 closest to the tube and the 10 closest to the rear of the chassis. It's better...
    • 20250910_224205.jpg
  • treborlicec
    treborlicec reacted to tron guy's post in the thread G07 weirdness with Like Like.
    Thats what I do. Though I measure each cap before I put it in, there is a variance. Sometimes, I'll go 330uf and a 200uf. 330 and a...
  • treborlicec
    treborlicec replied to the thread G07 weirdness.
    So, you suggest a 470 in 517 and a 10 in 518? I can try that tomorrow. This was a kit from a reputable source and seems to match what...
  • treborlicec
    treborlicec replied to the thread G07 weirdness.
    I can check. What should they be? I capped this a few years ago and new flyback, etc. It's been sitting on a shelf till I needed it...
  • treborlicec
    treborlicec replied to the thread G07 weirdness.
    Coil is solid. I could buy a new one. No way to adjust real time. Have to pull it out of the frame to get a tool in there.
    • 20250910_161949.jpg
  • treborlicec
    treborlicec replied to the thread G07 weirdness.
    That's the one I used this time. Still looks like shit.
  • treborlicec
    treborlicec reacted to KaBoom1701's post in the thread G07 weirdness with Like Like.
    334K width cap will fix this.
  • treborlicec
    treborlicec replied to the thread G07 weirdness.
    This is as good as I can get it after changing the width cap again to reduce the width. I can't stand it. It looks crooked at the bottom.
    • 20250910_161706.jpg
    • 20250910_161512.jpg
  • treborlicec
    treborlicec replied to the thread G07 weirdness.
    The width coil didn't really make any difference before. That's why I changed the cap. It's also inaccessible while in the frame.
Back
Top Bottom