Recent content by tommyshow

Robocop Is the Robocop Backglass still available? I need one for a restoration project. condition is not a problem as long as its in one piece. I'm in Spokane Washington so shipping is the fixed cost. tommyshow 509-483-3900

update on midway touchmaster infinity bios after about a year another touchmaster came thru the shop and we got the bios settings off the working game. We used those settings on the broken game and now the game works!! its about three pages of hand written info and I haven't posted it but I...

Makvision small lines at top of picture Ohmerone put us on the right track. we also changed C88 problem solved tommyshow

I need the sound unit for the Spooks by Williams (1969). I have a beautiful game but there was no sound unit included. Willing to buy (paypal). Please contact : [email protected] Any hints or suggestions?

midway infinity boot failure I was able to get into setup mode before I pulled the battery. However I now cannot enter setup mode and only message is "f1 to continue" followed by "insert diskett then press any key to continue"

infinity help needed any direction or ideas would help

midway infinity boot failure I pulled the battery to check now I can't get the game. after press f1 then "insert diskett" which I don't have so now what should or could I do?

Midway infinity hd was bad. I installed the new copy buy can't get past "f1 to continue" If I press f1 i can go into the game and I can get into the bios settings with f2 during the very first boot sequence. I don't know what the bios settings should be. I need the bios settings that would...

please don't over fuse always replace a slow blow(mdl) fuse with a slow blow. a overload condition will occur if you replace a fast blow acg fuse with a slow blow of the same value. safe way is to use the same value as the manufacture lists. caution over fuse condition can hurt or ruin a...

I have a Bromley Shocker that needs a little help. One handle works well the other needs a new motor assembley. I am willing to buy any parts working or unknown and can purchase thru pay-pal. If you have any info PLEASE get back to me. [email protected] thank you Tom McKay...