Recent content by titanfan

Looking to get either repro or new UMK 3 Bezel. I am assuming these were originally screen printed correct? Thanks, Dustyn

Check out North American Vanlines. They have a full fleet that does nothing but ship games. Usually cost 400-450 to ship something. It would take some coordination but its just an option.

http://stores.ebay.com/Retros-Classic-Arcade

PM sent. :P

Does anyone have any pictures of a NBA Jam T.E. that has been converted and not using the factory harness. I am trying to wire one up and I have it all working except for the sound from a known working sound board, and the test switch. I have looked at the manual but I must have overlooked...

Don't see why not. The connectors are made to be flipped.

T.E. all the way. I just picked up an extreme which is 4 years newer and I am about to sell it and use the T.E.

PM Sent. :)

I would think that powering down the board and the monitor and then turning it back on with a different board powered up shouldn't be an issue. The only thing linked up would be the sync wires from both harnesses, the speakers, and the input wires for the buttons and the joysticks. The power...

I have a customer that wants a bit of customization done to his cab. He currently has a dedicated NFL Blitz and wants me to install a NBA Jam in it also. He is not worried about extra power supplies or harnesses in the cab. My plan is to wire a double pole with center toggle switch in place...

If its just slamming in a new board thats pretty simple. PP boards are notorius for failing. There are a few people on here that I am sure will chime in with repair info.

Does anyone for see a problem to take a U5000 chassis off and pop a K7502 chassis on? Is a yoke swap needed?

Its my jamma rig basically set up to test jamma games and games that I have jamma conversions for. The board worked for a bit playing blind. I fixed the monitor and now I get nothing. There nothing on the screen. If it wasn't for the 2 LEDS on I wouldnt even have a clue it was powered up. I...

I just got my Ultimate Mortal Kombat 3 cabinet ready to go. My board doesn't work. I have put it on my jamma rig and its a no go. The only thing I get is the 2 red LED lights closest to the edge connector to come on. There is no sound, boot screen, or anything visibly damaged. Now, where to...

Sorry I guess I am all sorts of ways jacked up. I thought the 7000 and the 7191s were pretty interchangeable talking about the functions of them. I got the chassis up and running. I made sure the flyback I put on it matched the one that came off it. When I get back I will post some pictures...