Recent content by timiskander

  1. timiskander

    Transistor Replacement search

    Mouser suggests ZTX649, KSC2328AYTA, or ZTX649STZ... I did not check the pinouts tho Mouser Part Number,Mfr Part Number,Mfr.,Datasheet,Availability,Pricing,RoHS,Lifecycle,Product Detail,Technology,Mounting Style,Package / Case,Transistor Polarity,Configuration,Maximum DC Collector...
  2. timiskander

    Earth missing from Missile Command playfield

    If flip flop C7 is socketed, you can take it our and see if the output of C3 toggles. It seems unlikely that the input of the flip-flop would be able to keep itself high though given the output of the OR gate (C3) is push-pull (or "totem pole"). You can use your ohm meter to check between C3...
  3. timiskander

    Earth missing from Missile Command playfield

    Its good to see @HudsonArcade sharing his knowledge with the new guys :) (y)
  4. timiskander

    Looking for ideas on a control panel connection system

    I can't find the post I made about it (to be fair, it was 20+ years ago :O) but when I was building a MAME cabinet and wanted interchangeable control panels I built a mount with a bunch of leaf switch contacts in the cabinet where the back of the CP ended up and a bit of wood at the read of the...
  5. timiskander

    SOLD - GAME Taito Qix Project

    Nice to meet you today mk3u2012. Game made it back to its new home safe and sound. Thanks for the deal and efforts you made to expedite the loading :)
  6. timiskander

    SOLD - GAME Taito Qix Project

    Incomming pm...
  7. timiskander

    Atari test switch

    I believe the switch you are looking for is this https://www.mouser.com/ProductDetail/CK/7107SYCQE?qs=oIfnSaRkEUl0CGATxT7SnA%3D%3D C&K 7107SYCQE - SPDT with ON-OFF-(ON) action Do NOT get the ON-NONE-(ON) version as that has no center position
  8. timiskander

    KLOV Lore over the years.

    Some epic threads have passed these pages... When posting a thread, it would cool if the author could put a link to the thread... although searching for the content might lead to some good reads too :)
  9. timiskander

    How do you guys hold a socket in place while soldering?

    +1 for the corners... I have used both masking/painters tape and also just holding the corner while you tack it down.
  10. timiskander

    FS Parts: Sanwa PM-1545 Monitor chasis

    Pulled from a 20" Sega monitor with a necked tube. Flyback is suspect as focus will drift after warming up. Just had a cap kit. Comes with yoke, purity rings, tube ground wire, and pigtails for input and degauss switch. $60 shipped in US
  11. timiskander

    SOLD - PARTS Sega 20" monitor frame

    Pulled from a tube outrun sit down (Sanwa PM-1545) with a necked tube :( $40 shipped in US All hardware is there.
  12. timiskander

    SOLD - PARTS WG 4900(?) Monitor frame

    I'm pretty sure its from a 4900 anyway. $20 + UPS shipping from 13066.
  13. timiskander

    MSH1FPU515A Flyback for a Sanwa PW-1545 chassis

    I have a Santa 20" PW-1545 in a turbo outrun where the focus drifts as it warms up. I'm pretty sure the focus pot on the flyback is the problem. I am unable to find the correct flyback for sale anywhere. If anyone has a lead on one or repair suggestions, I'm all ears! cheers /Tim
  14. timiskander

    WTB: MSH1FPU515A Flyback for a Sanwa PW-1545 chassis

    Reviving this thread as I also am looking for a flyback for a Santa 1545 (MSH1FPU515A). Maybe 7 years brings good luck? ;)
  15. timiskander

    SOLD - PARTS High Low Shifter Plate lot of 3 Chase Hq, Super Chase Racing Games +++

    Back from the dead this thread is... Anyone have one of these for sale? suzohapp has them for $17 but they also have a $50 minimum order :(
See more
Back
Top Bottom