Recent content by theseadoomaster

Here she is 95% finished,just waiting on the controllers.

Coin Door Befor And After

Cleaned Up The Monitor And Installed A Cap Kit(Numbers Matching k4901) Looking For A Tube To Do A swap,Has A Bit of Joust Burn.

Thanks all I used kona brown,gloss cherry,antique white all rustoleum. The only color that wasn't rustoleum is the yellow,I went with satin bright yellow valspar from lowes. I prob have 2 weeks in the body work and painting,and clear.

Just Finished The Matte Clear Over The Gloss Paint. Looks Alot Better IMOP, First Pic Is Gloss Second Is With Clear.

Thanks,yeah it is a little scary but this is the first time I cut out only the parts that get paint with about 1/4 inch of the sticky showing so as to not peel any of the previous paint underneath and it worked out good.

I did gloss but I'm gonna matte clear over the entire thing.

Gamestencils.com has the colors listed if you are gonna use latex. I used spray cans to get a smoother finish,the only color I can remember is the kona brown. I can list the others after I get back home.

I too am looking for these for a Joust I am Restoring.

I got the stencils from gamestencils.com The paint for the most part is rustoleum products ,primer and paint. I used spray cans,I wanted the cabinet as smooth as possible. I started work on the power brick and making hopefully my last parts order.

I didn't see any robotron paint as I removed all the side art. Only joust. But after looking at some robotrons online you may be right.

I Made sure to spray the cab with primer,i used an automotive filler primer from a can. And Rustoleum spray cans for the colors. The biggest thing that helped with the stencils were instead of removing the backing i trimmed around the cutouts and only removed that part. So as to have as little...

Last Stencil DONE

Second Stencil Done

First Stencil Done