Recent content by tfortin

Does anyone work on sharp 2001n chassis’

I Just recapped a Sharp XM 2001n that is in an Atari Assault. I plugged the monitor into the game on the back side (cables were long enough). I did this prior to putting all of the screws back into the chassis. I had a horizontal issue and I wanted to see if the cap kit fixed it. The nice...

Hello, Need to rejuvenate my 13" orion monitor and need a cr-31 adapter... Anyone have an extra that they would like to sell? let me know, Tim

One more thing to add... I don't know if it is indicative on anything... but if I unplug the yoke, the resistor cools. The spot killer comes on (so probably with no deflection the spot killer is on and all current stops flowing to the resistor). Also... if I were to use the 18ga wire strap...

Andrew, thanks for the info... The resistor was burnt when I started... I replaced it as part of the cap/transistor replacements. The picture is great... so I know that for the most part my work should be good.. I did check the diodes on the board and they appeared good (I know that one leg...

Ian, yeah I thought that they could get hot, but if I leave the monitor on for long, this resistor will burn out. This is just R100... R101 is as cool as a cucumber. I called a friend this morning that has a G05 and he said his resistors are not hot at all. So there is a lot of extra current...

Hi, I have just completely shotgunned my G05-802 monitor. I am able to get a nice picture but R100 is crazy hot. It was burnt up prior to me starting, so I replaced it with the recommended 3.9 ohm 15watt resistor and still hot. I know that these resistors are not "necessary" but have also...

Hi, I am looking for the Gorgar voice/sounds roms that go on the sound pcb. or if anyone has a working sound pcb for Gorgar. Let me know, tim

Looking for two eight ball deluxe plastics. The one that goes over the eight ball lane and the one that goes over the multiplier lane. They are the 2 biggest pieces in the game. The rest of my plastics are fine, so don't really want to spring for a whole set... thought I would give this a try...

looking for working squak and talk pm me and let me if you still have one.

Looking for a working Asteroids PCB, or someone that can repair one Hi, I am looking for a working Asteroids PCB, or maybe someone out there that can repair one. let me know, Tim

Hi, Does anyone have, or know of a place to get an Asteroids Bezel. Doesn't have to be original... a reproduction would be just fine. thanks, Tim

Hi, Looking for a good working Midway 90412 Power Supply. Let me know if anyone can help me. Thanks, Tim

Hi, Anyone out there have 2 Kickman buttons? Let me know and thanks.

Hi, I just picked up a Kickman this past weekend. This is my first MCR game so I am struggling with something other than Jamma... The game has 2 issues. 1.) The game produces no sound. I have verified connections and that the speakers are working, but I am not sure of the "sound path". It...