Recent content by talon93pete

flynn54321 purchased mine, I replaced both motors. Ask nice maybe he would check, too long ago for me to remember.

HI guys, TIA. I'm working on a r-82 that clips something horrible on both left and right channels if I hook both phono inputs into the amp. If I hook just the right up with either of the phono lines it sounds ok but lacks base. If I hook just the left channel both channels come alive but really...

Yep not the issue then. Just moved beyond my pay grade for sys 1

Maybe check the ball trough switch. I battled an issue like this for a couple days before I found that i left the ball sitting on my pool table after I installed the glass.

Figured I would try. Just got my Williams Comet going, it, at best, has a modest appearance. A used set of legs would work great. TIA

K sorry for the for the resurrection. The inputs Mr Ken mentions work great. There is a caveat the amp needs to have the mute signal removed. At this point I have a switch connected to the outer cam switch till I can come up with something more elegant.

Thanks much

HI and thanks in advance. Recently grabbed a converted Frogger (sega gremlin) with blue missing. I figured I would install a cap kit and do some diagnostics while I do so. But.... Ive never seen this chassies. Bob Roberts has a photo of one with a big ?? to I searched the archives but could...

Yeee haaaw. Sub roc gonna get some love. I knew u were the guy to take her away.

Yep that's the plug. The 63 flashers are solenoids to the CPU. If you have voltage flashing on the appropriate pins then you are looking for bad bulbs, sockets, or ground unless one of the more experienced folks can lend a hand. Comet is only my second solid state Williams.

Wow deffinately makes me wanna come see a Packer game

Excellent a working table is further along than I am. The #63 bulbs are run off the main CPU board. The TIPS Q 39, 41, 42, 50, 54, and 55 control the bulbs. They should be checked though not likely the issue since all your 63 bulbs are out. Next is a good look at the CPU plug 1J11. All the...

I believe all the 63 bulbs are all controlled. Not GI that is. We never asked if your table will start and play a game. If it does not start a game you will need to remedy that issue before moving on. If it does play do the dirty quick check on all your TIPS.

you can download a manual off the "internet pinball database" its not a great scan but it works.

The light in my boys gamer eyes is enough for me.