Recent content by Talon2000

https://www.mcmaster.com/9657K676/ I just bought these and they work fine.

Almost a problem with the vertical scrolling playfield window circuit. Replaced P8 working

Yes P8 fixed the problem. I rebuilt the monitor, plus I put the game board on my pat9000 which has a known good monitor.

Not a monitor problem, as previously stated. Found a bad output output on P8 74ls08 pin 3 feeding the playfield window flipflop.

It's got a strange issues where the graphics on the top 1.5 inches, and bottom 1.5 inches appear to stretch. So when a race car drives off the top it looks like it's going to warp drive, and stretches off the screen. Also when the objects like bushes scroll from top to bottom on the top 1.5" of...

They have less contact surface area for the headers, they cut into the wire when the wire is pressed in causing weak points, wires come loose from the connectors, current rating, and temp ratings are typically lower than that of a better crimp connector with Trifurcon pins. They are the bane of...

But why IDC connectors?

Thank you. My searches were coming up blank.

Looking for the dimensions for a Ded MH monitor glass.

Mine wasn't routed for a 6100 either, so don't feel to bad. I've still got an older conversion kit to convert a Gravatar to a Quantum, and it's routed for the 6100. Since I can't find the same screws Markrl used to build the cabs to replace the missing ones, I'm just going to have to remove...

Well Quantum wasn't designed for the 6100, so my guess is that you will have to cut slots to fit the 6100.

Here's pics of mine. Started with nothing. Been collecting for the past several years, put off until I could build cabs, but this deal came up first. /blank Quantum /blank Major Havoc

For Quantum?

Yes, but so far all I can find is bronze, and or black in a course thread, and not the fine thread like the ones that are already present. I would rather not have to replace the ones that are there, if I can only find the source used for the screws that Markrl used when he built my cabinet.

I included a picture, for some reason it won't let me actually put it in the post, just a link. But I'm talking about the Major Havoc cabinet I bought Markrl. https://photos.app.goo.gl/ZVga1BQtBoTd9YUR8 The cabinet has the holes drilled for the screws, and has just enough of them to hold the...