swood's latest activity

I'm personally shocked by just how high the price on games have become. That said, your looking at close to $3K Also, your laserdisc...

Mine are also the ARKEY. Yes, there are many parts with two versions. G07 Vs WG4900 for example. Both are equally original.

I like your work Paul, the project is coming along great. Your main board looks to be all original and in good condition. I like that...

So I bought this DL1 together with a DL2, Space Ace conversion (Marquee, CP, disk, roms) and a Thayers Quest conversion (sold to...

Paul, Yours and mine may have come off the line on the same day. :)

Here is a picture of the serial stamp... This is the upper panel from my own cabinet. The serial is LD-07922. Ignore the 6394 that...

The serial number is pressed into the wood of the upper back panel. It's usually very hard to see unless the lighting and viewing angle...

I may have been wrong about the removal of the V1000's feet. But the plate is supposed to be screwed to the bottom of the player so you...

I have had reports of dead serial ports on the laserdisc players. It's not common, but it does happen. The only way to test the...

A bigger issue than the incoming air filter, is the exhaust filter covering the cooling fan. If you take the cooling fan assembly off...

The vibration isolators are positioned for the PR-7820 laserdisc player. The feet of the player are removed, and bolts go up through the...

I think that's a monitor neck guard. It's not part of the DL cabinet.

Hi Paul, Welcome to the KLOV forums! How's that DL1 restore going? -Shaun

I'm in shock. I was just chatting with Dan on the 25th. He wanted to do a free play mod on his Cobra Command. He never said anything...

Download the LD-V8000 manual Level 1&3 On appendix D page D-1 you will find the cable pin to pin wiring. Long shot here, but If you...