Recent content by simpsons99

rant Sega/Data East I have the same problem going on with my Robocop One side of the Bumpers is not working .

here's the pictures

My Lost Tomb machine has a Green wire that has came loose from the control Panel some where? I can not see anywhere that this is missing from.. Anyone know? thank you for responds

What is this Heat Shrink your talking about? on the bottom of the fuse holder the 2 wires are black taped or something? That's what made me think there hard wired into the fuse holder . Yes I was trying to find the right fuse holder and just take the fuse and put it in the fuse holder and...

I was hoping to have this fixed this weekend .. The lack of responds is stopping that from happening.

Bad Fuse Holders. On the power box and the transformer assembly Gottlieb used mostly horizontal (flat) fuse holders. This style of fuse holder is fine. But the vertical fuse holders used for the High Voltage and Line Power are junk, and often fail. If a game is not booting check the fuse...

How are these Ran? It seemed like there on a computer? The machine I played recently was the combo dk, dkjr, Mario Brothers .. It seemed to have problems with monitor to computer / pcb?

ok my request here is pictures of the Power Brick and the fuse holder . One picture shows it upside down . Wires going to the bottom of the Fuse Holder . There is black around the upper part of the wires going into the Fuse Holder .. maybe these are hard wired? I do not see how I remove...

it's the fuse holder in the power brick by the coin box . *power switch* The fuse holder snapped and will not lock the fuse in any longer .

just a small update on this . First off thank you all the responds .. I went to another website I saw had a different fuse holder .. Thinking it would be a complete match and I wouldn't have to completely tear apart the hole thing . Well Fuse fit into the fuse holder but it wouldn't lock...

ty guys for your posts . I messed with everything inside the machine and then turned it on and no flippers still . Then I did the tests it told me about a few flipper op switches not working right or something . I pressed help in test mode. I pushed the flippers and they worked in help...

Hello Guys I have had this problem with my Street Fighter 2 Pinball Machine for awhile now . The Power outlet holding the 2 Fuse Holders . The Top of one of the fuse holders snapped and will no longer lock the fuse in to the pinball can be powered up I have tried buying both fuse holders...

Hi Guys I am having problems with my TZ Pinball machine First it was not counting the balls right .. Not reloading the Gumball machine . When ball is locked into Gumball Machine it does a ball search and kicks a ball from the Gumball machine . I had the setting for 4 balls being stored in...

update went back and looked at the pcb again .. I missed the white cable . and the white power cable

Donkey Kong I went to install a kit .. I thought about taking a quick pic of the wiring but my cell phone did a crappy pic .. I went to unhook the cables and pull it away .. I found there was a cable on the back corner of the pcb. I unhook that cable and go to remove the pcb from the machine...