Recent content by shinguki

I'm interested in this working or not. If not working, the CPU needs to be 1992 CPU v1.1 as I will be swapping this out. Please see photo. Thanks

Everyone, Thank you for your help on this issue with maximum force single pcb rebooting. After a very close look at the PCB I found that the previous dingus that owned this thing bashed up the CPU pins causing a short. In an attempt to straighten the pins, I broke one off right at the base...

Thanks mecha. I'll take my sweet time... without an oven.

What do you guys think about this... I thinking about reflowing the board in an oven to fix any bad connections that might exist. ????

Mr. 510. That link was helpfull. I found I was running low voltage (4.9v) at the logic due to the testing process. After bumping the voltage up a hair (5.10v) there was still no change in the No Post.

The same thing happens when the CFF is not installed.

I'll give those a shot and report back later tonight. Thanks for the insite.

It is a single board. From what you described, the board is not seeing anything on the ide channel. Would I be able to save settings if I went back to HDD with the DUO upgrade?

Hi zenomorp, "CFF" as in compact flash? The ide has a notch so I can't flip the adapter. And the compact flash has guide rails so I can't flip that. Did you mean flip something else? Thanks

KevsArcade, thanks for the info. PS is new. just tested leads just in case. all is well on the PS.

Maximum Force/Area 51 Reboots and Never Fully Starts Hello Everyone, Long time reader, First time posting. I recently upgraded my dedicated Maximum Force cabinet to Maximum Force/ Area 51 Duo. Not only is this a nice upgrade but I was hoping this would fix a booting/reset issue it has. So...