I don't have the cocktail game variant to measure distance, just the upright. 1 foot for the upright would work with the proximity of the power supply pcb to the suitcase, however it looks like 1 foot might be a little too short and 2 feet might be too much for the cocktail layout. That detail...
I'll do it. I'll order everything and make it. Above and beyond materials and shipping charges, I'll ask for compensation of a couple hours of my time. $100
Problem is, I'll need the harness from the power supply PCB and coin door sent to me.
@mecha - Makes more sense for you to do it. You...
Maybe. It's worth a call, but I seriously doubt he'll have time with the rush of orders that are going to be flooding in the next few weeks. I can build the harness. Mecha can too. You can too with a little practice. Still doesn't address the pinning of the wires from what is now connected to...
He used to make custom harnesses, but this is such a small and simple job, and with him closing in 2 weeks, I'm 100% certain custom harnesses is not an option.
Yeah. Go to the website and select what gauge wire and what base color (striped or solid) you want. Each base color has a multitude of stipe colors (pretty much every combo) and is sold by the foot. 18 awg is .29 cents a foot. 22 awg is .17 cents a foot.
**Just noticed that there is a banner...
Got into the pizzeria and took some detailed photos for reference. I was correct on the 3 connectors needed and the power suitcase is the same version as pictured above.
We need to go from this Amp 12 pin female connector on the suitcase
To this Molex 12 pin molex KK .156 connector...
Yessir. Pin 1 (Black-White) is in the southeast corner of the connector. Could just use one color of wire with labels on each end when making a new harness, or Wire-Bot is out there if you want to get everything back to OG, and he sells by the foot. Wirebot is in Madison, WI BTW...
Funny enough, I came across this post where someone did the same thing to an upright Burgertime and a similar problem occurred
http://www.arcadevidiocy.com/2019/03/24/burgertime-power-supply-cleanup/
Same as the upright. I can take photos of my upright at my pizzeria in the morning. Too bad they tossed the harness from the suitcase to the power supply PCB.
Pinout is in the manual
https://www.arcade-museum.com/manuals-videogames/B/BurgerTime.pdf
Gonna need
https://www.arcadepartsandrepair.com/store/pinball-kits-parts/pinball-parts/amp-12-pin-mate-n-lok-male-plug-connector/...
I thought we had switching power supply and the thick gauge black wire/plug outside the game via the coin door and connected to an extension cord to isolate it when we were on the phone the other day @1970. Why did it continue to wave in that scenario? Any idea why this would happen @mecha or...