Recent content by SavePointVG

Working boards: Sun PSU $70 Sega Sound Amp $20 Sega Servo Motor Board Make Offer Sega IO JVS Make Offer Sega SW Regu Make Offer 2x sets of pedals both working but may need minor calibration $80 ea 1 card reader for parts. Was working, but are the bane of all Initial D machines $50 +shipping

bump and price reduction!

another bump. These machines separate into 2 units and are on casters, not a difficult move

bump and price reduction!

New pic added to show players playing the game, first pic made the screens look stretched because of whatever part of attract mode that was.

I'm selling my Initial D 3 cabinet located at Abari in Charlotte. $1750 The good: Both machines link up Naomi 2s and GD ROMs rebuilt in the last year Steering columns rebuilt 2 years ago 1 card reader works great after being rebuilt. Includes 2 spare card readers for parts Includes 1 extra set...

Got this sorted, I replaced IC5 on the board with a new chip and this cleared up the issue. So strange.

I hope it helps get yours up and running! For my random issue- the tech Im working with was able to get a hold of the people over at Speedys who had a schematic piece thats not in the manual that pointed to a possible issue to one of the small 8 pin ICs on the board. I ordered and we will see if...

Hello gang, I have 2 quick and crash units and 1 gets heavy play. It recently started doing something really odd that I can find zero info about. After the cup explodes in round 4 a Japanese Minigame starts immediately. 3 rounds, 1 shot per round. The gun doesnt respond during this mode and you...

Sorry this took me so long to get around to! Here are pictures of that part but unfortunately there are no markings at all on it. I hope these can help you at least a little! https://imgur.com/gallery/PVTTTaN I have a new bizarre issue going on with one of my units right now. The game plays...

Ill pull my board again and see if I can get any markings off of it.

Heres a pic of my drive board. I couldnt get a good snap of the piece you need unfortunately. We replaced the filter cap last year as well at the top of the board. I checked the schematics too and it doesnt show that sadly. Let me know if I can be of any other help!

Looks like your fan is missing too, that goes in the hole at the bottom of that metal box. The metal box has the metal tabs on the side where your mounted boards will sit

I know the Bulb board is on the left and the PCB is on the right. Youll want to CAREFULLY bend the glass tube back into alignment of the 'fuse holder'. The optic from the gun rests in the that holder and must align with the flash from the bulb to work properly. The transformer sits directly...

I will snap a picture of the part you need next time I'm by the machine. As for your picture, I don't think that's part of a quick n crash unit. I haven't seen that anywhere in my cab and I've been all up in all parts of it!