Recent content by SaminVA

Sam's Arcade Fix Wells Gardner K 4800 Vertical Collapse lets fix it In this video I have my Wells Gardner 13" K-4800 monitor that I did a tube swap, full cap kit and new flyback 2 years ago and while recently using it in one of my videos it went into vertical collapse. Sense the tube swap it has...

Ok I just watched your first video, and I see you have seen my videos, but I did show the problem that was causing the saucer to rapid fire was the broken pin on the PIA socket. Here is the video starting at the time of the explanation which you may have missed.

I had the same problem 8 years ago, no video and the right saucer kicker world repeatedly fire over and over till it blew the 1-amp fuse under the playfield. Mine turned out to be a bad IC socket on the MPU board for the PIA chip closest to the 5101 ram IC. The damage to mine was cause by...

Sam's Arcade Fix - Capcom Bowling PCB Battery Replacement My Capcom Bowling board's on-board battery is dead so it will not save high scores and game settings. The on-board battery was only supposed to last 5 years and is now 37 years old so it's way past time to replace the battery. There are a...

Not saying bad caps are your entire problem but they need to be replaced anyway. I replaced mine a couple years ago as mine had wrong colors and color streaking. I replaced the electrolytic capacitors with tantalum capacitors. I explain why and show how I did it in a YouTube video.

Sams Arcade Fix Capcom Bowling Sound -5 Jamma Pin fix I noticed my Capcom Bowling board was missing all the bowling pin crash sounds. It turns out the missing sounds was due to the lack of -5 volts on the Team Play JAMMA harness as I plan to use both the Team Play and Capcom boards with a...

Sams Arcade Fix lets adjust the G07 to the game boards Now that the G07 monitor has a new cap kit installed, let's see if we can adjust the monitor to both the Teamplay multi board and the Capcom Bowling games.

Time to figure out what was wrong with this G07 monitor. Dim picture and B+ voltage 95 volts and would not adjust.

SAM'S ARCADE FIX Mike's Arcade Double JAMMA Adapter with TeamPlay's CMMB Multi game board and Capcom Bowling. Let's set it up. In this video I have decided to put these two game boards into the converted Qix cabinet. Before I start on the cabinet repair, I always like to get the game boards...

SAM'S ARCADE FIX TeamPlay NOS art and Capcom Bowling cabinet In this video I look at the NOS art I have been collecting over the years and look at the possibility of installing the art and CMMB TeamPlay multi game board in a Qix cabinet that has been converted into a Capcom Bowling. The cabinet...

Just a short follow up video.

It's been a year since my last video, but I am back.

My Star Trek Captains Chair

Stay strong Todd, Prayers for you and your family. :cry:

I am sure most of you have seen my YouTube channel @SamsArcadeFix which I have many videos of problems and fixes with my games. I'll post a few of my shorts as most of my videos are too long for some people but I try and show the process I go through to fix the problem. If you haven't seen my...